Brother International PT-2200 Users Manual - English - Page 67
Length Function
View all Brother International PT-2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
LENGTH FUNCTION Although the length of the printed label automatically adjusts to fit the length of the entered text, there may be times when you will want to make a label with a specific length. The Length function allows you to set the label length between 1.6" and 11.8" (4.0 cm and 30.0 cm). The default length setting is OFF. When the Length function is set to ON, the Length indicator on the right side of the display lights up. To turn on or off the Length function: 1 While holding down Length , press once, and keep held down to display the current length of the label (the text and both margins) briefly, then display the current label length setting (ON or OFF). 2 While still holding down Length , continue pressing until the desired label length set- ting is displayed. The Length indicator lights up when ON is selected. 3 Release . If ON was selected, the current label length setting is displayed. 4 Press Home or to select the desired length or use the number keys to enter the End length. To change the units (inches or centimeters) used to display the label length, press until the desired units are displayed. To change the length in 1" (1.0-cm)-steps, hold down either Home or , and End then release the key when the desired setting is displayed. 5 Press . 63