Brother International PT-2200 Users Manual - English - Page 82
Number, Too Small, Numbering, Replace, Batteries, Problem, System, Error, Limit, Too High, Too Long
View all Brother International PT-2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Error Message NO TAPE! NUMBER TOO SMALL! REPLACE BATTERIES! ROM PROBLEM! SYSTEM ERROR! TAB LIMIT! TEXT TOO HIGH! TEXT TOO LONG! Cause Remedy • This message appears if you try to print a label or feed the tape when no tape cassette is installed. • Install a tape cassette and try again. • This message appears if the number that is set to be printed using the Numbering function is less than the number above the cursor. • Press the key of a number that is greater than the number in the text. • This message appears if the installed alkaline batteries are about to run out. • Replace the batteries or use the AC adaptor. • This message appears if there is a problem with the machine's read only memory. • Contact your service representative. Turn off the machine, and then while holding down Align and , turn the machine back on. • This message appears if there is a problem with the machine's software. • Contact your service representative. • This message appears if 50 tabs have already been added to the Tab text when you press . • Limit the number of tabs in the text to 50. • This message appears if the • Reduce the size of the charac- size of the text is larger than ters or install a wider tape. the width of the installed tape. • This message appears if the length of the text is longer than the label length that has been set using the Length function. • Delete some of the text, reduce the character width or increase the set label length. 78