Brother International PT-2200 Users Manual - English - Page 81
CUTTER, ERROR, INVAL., LENGTH, LIMIT, Tab Length, MEMORY, FILES, Error Message, Cause, Remedy
View all Brother International PT-2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Error Message CUTTER ERROR! INVAL. CHRS! LENGTH LIMIT! LINE LIMIT! MEMORY FULL! NO FILES! Cause • This message appears if the tape cutter lever is pressed down while a label is being printed. • This message appears if the cursor is not below a number when you hold down Number and press . Remedy • Turn the P-touch off, then on again. • Move the cursor below a number before holding down Number and press . • This message appears if the text is longer than 1 meter when you try to print. • Shorten the text to less than 1 meter before trying to print. • This message appears if the Length function is used to set a label length that is less than 1.6" (4.0 cm) or more than 11.8" (30.0 cm). • Set the label length between 1.6" (4.0 cm) and 11.8" (30.0 cm). • This message appears if the Tab Length function is used to set a tab length that is more than 11.8" (30.0 cm). • Set the tab length so that it is less than 11.8" (30.0 cm). • This message appears if the number of lines in the text is greater than the maximum number of lines possible for the installed tape. • Reduce the number of lines or install a tape of greater width. • This message appears if you try to store a text file after 300 characters have already been stored in the memory. • Delete an unwanted file to make room for the new one. • This message appears if you try to recall or delete a text file from the memory when none are stored. • Store a text file first. 77