Home » Brother International Manuals » Printers » Brother International PT2600 » Manual Viewer

Brother International PT2600 Users Manual - English and Spanish - Page 21

The first Driver Setup dialog box appears - pt 2610

UPC - 012502602781

View all Brother International PT2600 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

6 Click the Next button to begin installation. To change the location where P-touch Quick Editor will be installed, click the Browse button, and then select the installation folder in the Choose Folder dialog box that appears. Then, click the OK button. After P-touch Quick Editor is installed, a dialog box appears, allowing you to select where shortcuts to P-touch Quick Editor will be added. 7 Select the desired locations for the shortcuts, and then click the Next button. A dialog box appears, allowing you to select whether or not to install the printer driver. To install the printer driver, click the Yes button. Windows® XP only: A message appears, informing you that the printer driver has passed compatibility tests and that the Continue Anyway button should be pressed if a warning message appears. Click the OK button. The first Driver Setup dialog box appears, informing you that the PT-2600/2610 printer driver will be installed. Continue with the procedure in INSTALLING THE PRINTER DRIVER on page 17. If the printer driver is already installed, click the No button. A dialog box appears explaining that installation is ﬁnished. Select "Yes, I want to restart my computer now.", click the Finish button to restart the computer, and then remove the CD-ROM from the CD-ROM drive. 14

Section	Page
Getting Started	2
For Your Information	2
Brother® 90 Days/One Year Limited Warranty and Replacement Service (For USA Only)	4
Important Information	6
GENERAL DESCRIPTION	8
TOP VIEW	8
BOTTOM VIEW	8
KEYBOARD & LCD DISPLAY	9
GENERAL PRECAUTIONS	10
BATTERIES	10
1 Remove the battery compartment cover on the back of the machine.	10
2 If batteries are already installed, remove them.	11
3 Insert eight new AA alkaline batteries, making sure that their poles point in the correct direc...	11
4 Attach the battery compartment cover.	11
OPTIONAL AC ADAPTER	11
1 Insert the plug on the adapter cord into the connector marked DC IN 9.5V on the right side of t...	11
2 Insert the plug on the adapter into the nearest standard electrical outlet.	11
TAPE CASSETTE	12
1 Lift open the tape compartment cover. The installed cassette is also released.	12
2 If a tape cassette is already installed, remove it by pulling it straight up.	12
3 If the ink ribbon in the tape cassette to be installed is loose, use your finger to wind the to...	12
4 Insert the tape cassette firmly into the tape compartment, making sure that the entire back of ...	12
5 Close the compartment cover, and then turn on the machine, if it is off.	12
6 Hold down c and press r once to advance the tape and remove any slack (for TZ tape only).	12
CONNECTING THE P-TOUCH TO A COMPUTER	13
1 Insert the flat (A) connector on the USB cable into the USB port on the computer.	13
2 Insert the square (B) connector on the USB cable into the USB port on the right side of the P-t...	13
3 Turn on the P-touch.	13
INSTALLING THE SOFTWARE AND PRINTER DRIVER	14
On an IBM PC-Compatible Computer	14
1 Insert the enclosed CD-ROM into the computer’s CD-ROM drive. A dialog box automatically appears...	15
2 Click the upper button (P-touch Editor). The InstallShield® Wizard for installing the P-touch E...	15
3 Carefully read the contents of the Welcome dialog box, and then click the Next button to contin...	16
4 Type the necessary information into the appropriate boxes (If the information has already been ...	16
5 Click the Yes button to register the entered information.	16
The Setup Type dialog box appears.	16
6 Select the installation method, and then click the Next button.	17
7 After P-touch Editor is installed, a dialog box appears, allowing you to select whether or not ...	17
To install the printer driver, click the Yes button.	18
1 Insert the enclosed CD-ROM into the computer’s CD-ROM drive. A dialog box automatically appears...	19
2 Click the middle button (P-touch Quick Editor). The InstallShield® Wizard for installing the P...	19
3 Carefully read the contents of the Welcome dialog box, and then click the Next button to contin...	20
4 Type the necessary information into the appropriate boxes (If the information has already been ...	20
5 Click the Yes button to register the entered information.	20
The Choose Destination Location dialog box appears.	20
6 Click the Next button to begin installation.	21
After P-touch Quick Editor is installed, a dialog box appears, allowing you to select where short...	21
7 Select the desired locations for the shortcuts, and then click the Next button. A dialog box ap...	21
To install the printer driver, click the Yes button.	21
The first Driver Setup dialog box appears, informing you that the PT-2600/2610 printer driver wil...	21
1 Insert the enclosed CD-ROM into the computer’s CD-ROM drive. A dialog box automatically appears...	22
2 Click the third button from the top (P-touch AV Editor). The InstallShield® Wizard for installi...	22
3 Carefully read the contents of the Welcome dialog box, and then click the Next button to contin...	23
4 Type the necessary information into the appropriate boxes (If the information has already been ...	23
5 Click the Yes button to register the entered information.	23
The Choose Destination Location dialog box appears.	23
6 Click the Next button to begin installation.	23
After P-touch AV Editor is installed, a dialog box appears, allowing you to select where shortcut...	23
7 Select the desired locations for the shortcuts, and then click the Next button. A dialog box ap...	23
To install the printer driver, click the Yes button.	24
1 In the dialog box that appears, informing you that the PT-2600/2610 printer driver will be inst...	25
2 Connect the P-touch 2600/2610 to the computer using the enclosed USB interface cable as describ...	25
3 Click the Finish button. A dialog box appears, indicating that the installation is finished.	25
4 Select “Yes, I want to restart my computer now.”, click the Finish button to restart the comput...	25
1 In the dialog box that appears, informing you that the PT-2600/2610 printer driver will be inst...	25
2 Connect the P-touch 2600/2610 to the computer using the enclosed USB interface cable as describ...	26
3 Select “Install the software automatically (Recommended)”, and then click the Next button. A di...	26
4 Click the Continue Anyway button to continue with the installation. A Found New Hardware Wizard...	26
5 Click the Finish button. A Driver Setup dialog box appears, indicating that the printer driver ...	26
6 Click the Finish button. A dialog box appears, indicating that the installation is finished.	27
7 Select “Yes, I want to restart my computer now.” (or “Yes, restart immediately” if the printer ...	27
1 Turn off the P-touch 2600/2610, and then disconnect it from the computer.	27
2 Insert the enclosed CD-ROM into the computer’s CD-ROM drive. A dialog box automatically appears...	27
3 Click the lower button (Driver).	27
A Driver Setup dialog box appears, allowing you to select whether to replace, add or delete the P...	27
4 Select either “Replace with new Brother PT2600/2610.” or “Add Brother PT2600/ 2610.”, and the...	27
5 A dialog box appears, instructing you to connect the P-touch 2600/2610 to the computer.	28
6 Connect the P-touch 2600/2610 to the computer using a USB interface cable as described on page...	28
7 Click the Finish button.	28
5 A dialog box appears, instructing you to connect the P-touch 2600/2610 to the computer.	28
6 Connect the P-touch 2600/2610 to the computer using the enclosed USB interface cable as describ...	29
7 Select “Install the software automatically (Recommended)”, and then click the Next button. A di...	29
8 Click the Continue Anyway button to continue with the installation. A Found New Hardware Wizard...	29
9 Click the Finish button. A Driver Setup dialog box appears, indicating that the printer driver ...	29
0 Select “Yes, restart immediately.”, click the Finish button to restart the computer, and then r...	29
On a Macintosh Computer	30
1 With the P-touch 2600/2610 and the Macintosh turned off, connect the P-touch to the computer us...	30
2 Turn on the Macintosh.	30
3 Insert the enclosed CD-ROM into the computer’s CD-ROM drive.	30
4 Double-click the Mac OS 9 folder to open it.	30
5 Double-click the P-touch Editor 3.2 folder to open it.	31
6 Double-click the P-touch Editor 3.2 Installer icon in the folder that appears. The installer st...	31
7 Select the installation method.	31
8 When the dialog box appears, indicating that the installation is finished, click the Quit button.	31
9 When the dialog box appears, asking if you wish to restart the computer, click the Restart butt...	32
1 With the P-touch 2600/2610 and the Macintosh turned off, connect the P-touch to the computer us...	32
2 Turn on the Macintosh.	32
3 Insert the enclosed CD-ROM into the computer’s CD-ROM drive.	32
4 Double-click the Mac OS X folder to open it.	32
5 Double-click the P-touch Editor 3.2 folder to open it.	32
6 Double-click the P-touch Editor 3.2 Installer icon in the folder that appears. The installer st...	32
7 Click the Next button. The Choose Product Components dialog box appears.	33
8 Select the installation method.	33
The Choose Alias Folder dialog box appears, allowing you to select where an alias to P-touch Edit...	33
9 Select the desired location for the alias, and then click the Next button. A dialog box appears...	34
0 Check that the installation will be performed as desired, and then click the Install button. Af...	34
A Click the Done button, and then restart the computer.	34
1 With the P-touch 2600/2610 and the Macintosh turned off, connect the P-touch to the computer us...	34
2 Turn on the Macintosh.	34
3 Insert the enclosed CD-ROM into the computer’s CD-ROM drive.	34
4 Double-click the Mac OS 9 folder to open it.	35
5 Double-click the P-touch Quick Editor Installer icon in the folder that appears. The installer ...	35
6 Select the installation method.	35
7 When the dialog box appears, indicating that the installation is finished, click the Quit button.	35
8 When the dialog box appears, asking if you wish to restart the computer, click the Restart butt...	35
1 With the P-touch 2600/2610 and the Macintosh turned off, connect the P-touch to the computer us...	36
2 Turn on the Macintosh.	36
3 Insert the enclosed CD-ROM into the computer’s CD-ROM drive.	36
4 Double-click the Mac OS X folder to open it.	36
5 Double-click the P-touch Quick Editor folder to open it.	36
6 Double-click the Quick Editor Installer icon in the folder that appears. The installer starts u...	36
7 Click the Next button. The Choose Alias Folder dialog box appears, allowing you to select where...	37
8 Select the desired location for the alias, and then click the Next button. A dialog box appears...	37
9 Check that the installation will be performed as desired, and then click the Install button. Af...	37
0 Click the Done button, and then restart the computer.	37
1 With the P-touch 2600/2610 and the Macintosh turned off, connect the P-touch to the computer us...	37
2 Turn on the Macintosh.	37
3 Insert the enclosed CD-ROM into the computer’s CD-ROM drive.	38
4 Double-click the Mac OS X folder to open it.	38
5 Double-click the Driver Installer icon in the folder that appears. The installer starts up, and...	38
6 Click the Next button. A dialog box appears, allowing you to check the installation.	38
7 Check that the installation will be performed as desired, and then click the Install button. Af...	39
8 Click the Done button, and then restart the computer.	39
1 Turn on the P-touch 2600/2610.	39
2 Pull down the Apple menu and select “Chooser” to display the Chooser window.	39
3 In the list on the left, click the PT2600/ 2610 icon. Then, select the appropriate printer fro...	39
4 Close the Chooser window to confirm your settings.	39
1 Turn on the P-touch 2600/2610.	39
2 Double-click the Applications folder on the Macintosh HD to open it.	39
3 Double-click the Utilities folder to open it.	39
4 Double-click “Print Center” to start it up.	39
5 Click the Add Printer button. A list of detected USB printers appears.	40
6 Select “PT-2600/2610” from the USB list, and then click the Add button. The PT-2600 appears in ...	40
7 Quit Print Center.	40
READING THE USER’S GUIDE	40
On an IBM PC-Compatible Computer	40
1 Start up Windows® Explorer.	40
2 Select the CD-ROM drive.	40
3 Double-click the Ptouch folder	40
4 Double-click the Manual folder	40
5 Double-click “Main.htm”.	40
1 Click the Start button in the taskbar to display the Start menu.	40
2 Point to “Programs”.	40
3 Point to “P-touch Editor 3.2”.	40
4 Click “The User’s Guide P-touch Editor 3.2”.	40
On a Macintosh Computer	40
USING P-TOUCH EDITOR 3.2	41
1 Click the Start button in the taskbar to display the Start menu.	41
2 Select “Programs”.	41
3 Select “P-touch Editor 3.2”.	41
4 Click “P-touch Editor 3.2”.	41
1 Start up Windows® Explorer.	41
2 Select the drive and directory where P-touch Editor is installed.	41
3 Double-click “Ptedit3.exe”.	41
1 Click (Text button) on the draw toolbar. Text can be typed in, and the pointer changes from (se...	43
2 Move the I-beam pointer to the position in the layout area where you wish to type in text, and ...	43
3 The cursor flashes in the layout area to indicate that you can now type in text.	43
4 Use the computer keyboard to type in the text.	43
5 To create a new line of text, press the keyboard’s Enter key.	44
USING THE P-TOUCH QUICK EDITOR	44
1 Click the Start button in the taskbar to display the Start menu.	45
2 Select “Programs”.	45
3 Click “P-touch Quick Editor”.	45
1 Click the arrow beside the Properties button to display a drop-down menu.	46
2 Click [Tape Settings] to display various label format settings.	46
3 In the Format list, click the desired label format.	46
1 Click the arrow beside the Properties button to display a drop-down menu.	46
2 Click [Text Settings] to display various text format settings.	46
3 In the Text Settings Properties, select the desired text formats.	46
4 Click in the label view, and then type or import the text.	46
1 Select the desired text in the other application.	47
2 Import the text into the label layout either by pressing the designated shortcut keys (Windows®...	47
1 Click the Text History button to display the Text History list.	47
2 Click the desired text.	47
1 Windows®: Right-click in the label view (or text box), select [Symbols] in the menu that appear...	47
Macintosh: Hold down the Control key and click in the label view (or text box), select [Symbol fo...	47
2 In the Symbol Font list, select the desired symbol font.	47
3 In the Symbol List view, select the desired symbol.	47
4 Click the OK button. The selected symbol is added at the left of the text.	47
Macintosh: Hold down the Control key and click in the label view (or text box), select [Backgroun...	47
1 Click the arrow beside the Print button to display a drop-down menu.	48
2 Click [Print Options]. The Print dialog box appears.	48
3 Select the desired print settings.	48
Auto Cut: This option allows you to select whether or not to automatically cut off the label afte...	48
Mirror Printing: This option allows you to print the text in reverse so it’s perfect for attachin...	48
Copies: This option allows you to enter the number of copies to be printed.	48
4 Windows®: Click the OK button to start printing.	48
Macintosh: Click the Print button. The layout is printed.	48
USING THE P-TOUCH AV EDITOR	49
1 Click the Start button in the taskbar to display the Start menu.	49
2 Select “Programs”.	49
3 Click “P-touch AV Editor”.	49
1 Click(Symbol button). The Input Symbol dialog box appears.	50
2 In the Symbol Font list, select the desired symbol font.	50
3 In the Symbol List view, select the desired symbol.	50
4 Click the OK button. The selected symbol is added to the left of the text.	50
1 Click the arrow beside(Print button) to display a drop-down menu.	51
2 Click [Print Options]. The Print dialog box appears.	51
3 Select the desired print settings.	51
4 Click the OK button to start printing.	51
UNINSTALLING THE SOFTWARE & PRINTER DRIVER	52
On an IBM PC-Compatible Computer	52
1 Start up Windows® 98, 98 SE, Me, 2000 or XP.	52
2 Click the Start button in the taskbar, select “Settings”, and then click “Control Panel”. With ...	52
3 In the Control Panel window, double-click “Add/Remove Programs” (“Add or Remove Programs” in Wi...	52
4 In the Add/Remove Programs Properties dialog box, select “P-touch Editor 3.2” (to delete the P-...	52
5 A message appears, asking if you wish to delete the selected application. Click the Yes button ...	52
6 In the dialog box that appears, indicating that the application is deleted, click the OK button.	52
1 Turn off the P-touch 2600/2610, and then disconnect it from the computer.	52
2 Insert the enclosed CD-ROM into the computer’s CD-ROM drive. A dialog box automatically appears...	52
3 Click the lower button (Driver).	53
A Driver Setup dialog box appears, allowing you to select whether to replace, add or delete the P...	53
4 Select “Delete Brother PT-2600/2610.”, and then click the Next button. A dialog box appears, as...	53
5 Click the Yes button. A dialog box appears, indicating that the printer drivers have been deleted.	53
6 Click the Finish button.	53
On a Macintosh Computer	53
1 Drag the following to the Trash icon:	53
2 In the System Folder, open the Extensions folder.	53
3 Drag the following to the Trash icon:	54
4 In the System Folder, open the Preferences folder.	54
5 Drag the following to the Trash icon.	54
1 Double-click the Applications folder on the Macintosh HD to open it.	54
2 Double-click the P-touch Editor 3.2 folder to open it.	54
3 Double-click the Uninstall P-touch folder.	54
4 Double-click the Uninstall P-touch icon in the folder that appears. The uninstaller starts up.	54
5 Click the Uninstall button. After P-touch Editor 3.2 is removed, a dialog box appears, indicati...	54
6 Click the Quit button.	54
1 Double-click the Applications folder on the Macintosh HD to open it.	54
2 Double-click the P-touch Quick Editor folder to open it.	54
3 Double-click the Uninstall P-touch folder.	54
4 Double-click the Uninstall P-touch icon in the folder that appears. The uninstaller starts up.	54
5 Click the Uninstall button. After P-touch Quick Editor is removed, a dialog box appears, indica...	54
6 Click the Quit button.	54
ATTACHING LABELS	55
1 Hold the tape in your left hand, with the printed surface facing up, and hold the stick in your...	55
2 Pass the tape halfway through the long narrow hole in the stick.	55
3 Turn the stick three-quarters of a turn towards you and pull the stick away from you as shown b...	55
4 Peel off the label backing.	55
PRINT HEAD & ROLLERS	56
1 Turn off the machine, and then disconnect the AC adapter and remove the batteries.	56
2 Open the tape compartment cover, and then remove the tape cassette if one is installed. The pri...	56
3 Print head: Use a dry cotton swab to gently wipe the print head with an up-and-down motion. Rol...	56
4 Install a tape cassette, close the tape compartment cover, and then try printing again.	56
5 If a white streak still appears in the label, repeat steps 3 and 4 using a cotton swab dipped i...	56
POWER KEY	57
CURSOR KEYS	57
CODE, ALT & SHIFT KEYS	58
1 Hold down c and press s. The Caps indicator on the left side of the display comes on.	60
2 Press the keys of the desired letters or symbols.	60
3 To exit Caps mode, hold down c and press s. The Caps indicator goes off.	60
SPACE KEY	61
RETURN KEY	61
NEW BLOCK KEY	63
TAB FUNCTION	64
1 Hold down c and press W once. The current tab length is displayed.	64
2 Press e or h until the desired length is displayed or use the number keys to type in the length.	64
3 Press _.	64
1 Hold down c and press W once.	65
2 Press h until 1.0 is displayed.	65
3 Press _.	65
DELETE KEY	66
1 Press f, w, e or h to position the cursor below the character immediately to the right of the c...	66
2 Press * once.	66
1 Press f, w, e or h to position the cursor below the character immediately to the right of the l...	66
2 Hold down * until all of the characters that you wish to delete are deleted.	66
LINE OUT FUNCTION	66
1 Press f, w, e or h to position the cursor within the line of text that you wish to delete.	66
2 Hold down c and press P once.	67
CLEAR FUNCTION	67
1 Hold down c and press *.	67
2 Press e or h until TXT&FORMAT is selected (flashing).	67
3 Press _.	67
1 Hold down c and press *.	68
2 Press e until TXT&FORMAT is flashing.	68
3 Press _.	68
1 Hold down c and press *.	68
2 Press e or h until TEXT ONLY is selected (flashing).	68
3 Press _.	68
1 Hold down c and press *.	69
2 Press h until TEXT ONLY is flashing.	69
3 Press _.	69
ACCENT FUNCTION	69
1 Hold down c and press A. The message “ACCENT a – u / A – U?” appears on the display.	70
2 Press the key of the letter in the desired accented character.	70
3 Press f or w until the desired accented character appears enlarged within the frame in the midd...	70
4 Press _. The accented character is added to the text.	70
1 Hold down c and press A.	70
2 Hold down s and press E.	70
3 Press w until É appears in the frame.	71
4 Press _.	71
SYMBOL FUNCTION	71
1 Hold down c and press a. A row of symbols appears in the display.	72
2 Press e or h to display different rows of symbols and press f or w until the desired symbol app...	72
3 Press _. The symbol is added to the text.	72
1 Hold down c and press a.	72
2 Press e or h until the row containing “” appears, and then press f or w until “” appears in the...	72
3 Press _.	72
AUTO FORMAT FUNCTION	73
1 Press ior jonce. The A/F indicator comes on.	73
2 Press e or h until the name of the desired layout appears.	73
3 Press _. The first field for the selected layout appears in the display.	73
4 For each field, type in the text, and then press _. When _ is pressed after typing in the text ...	73
5 Press e or h until the CHNGE STL? command is displayed.	73
6 Press _.	73
7 Press e or h to select the desired character style.	74
8 Press _. “MENU” appears in the display.	74
9 Press e or h until the PRINT command is displayed.	74
0 Press _ to print the label, and have machine automatically cut it off. The message “COPIES 1/1...	74
A Press e or h until the EDIT MORE command is displayed.	74
B Press _. The first field for the selected layout appears in the display.	74
C Repeat step 4 until the text is edited as you wish. The MENU appears again when _ is pressed af...	74
D Press e or h until the EXIT command is displayed.	74
E Press _. The message “EXIT AUTO FORMAT?” appears in the display.	74
F Press _. The Auto Format function is exited, and the text that was displayed before the Auto Fo...	74
1 Press j.	74
2 Press e or h until layout 35 (FILE SHORT) is displayed.	75
3 Press _.	75
4 Type in “August Sales Report”, and then press _.	75
5 Press e or h until CHNGE STL? is displayed.	75
6 Press _.	75
7 Press e or h until ELEGANT is displayed.	75
8 Press _.	75
9 Make sure that PRINT is displayed, and then press _.	76
1 Press i.	76
2 Press e or h until layout 4 (ADDRES4) is displayed.	76
3 Press _.	76
4 Type in “Mr. R. Becker”, and then press _.	76
5 Type in “29 South Main St.”, and then press _.	76
6 Type in “Los Angeles, CA 88888”, and then press _.	77
7 Press e or h until CHNGE STL? is displayed.	77
8 Press _.	77
9 Press e or h until FORMAL is displayed.	77
0 Press _.	77
A Make sure that PRINT is displayed, and then press _.	77
STAMP FUNCTION	85
1 Type in the text, and then insert a medium (3/4” (18 mm)-wide) or large (1” (24 mm)- wide) stam...	85
2 Hold down c and press U once. The message “STAMP FORMAT?” appears in the display.	85
3 Press _. The text is automatically formatted for the installed stamp: centered within the prese...	85
4 Press p to cut the text out of the stamp stencil film.	85
5 After the stamp stencil film is cut off, remove the backing paper from the stamp stencil film a...	85
1 Enter the text and insert a stamp film cassette in the tape compartment.	86
2 Hold down c and press U.	86
3 Press _.	86
4 Press p to engrave the stamp stencil film, and then automatically cut it off.	86
5 Remove the stamp frame from around the stamp film holder ink pad, one side at a time, and then ...	86
6 With the glossy side of the stamp stencil film upward, align one of its ends with the slit on t...	86
7 Hold the end of the stamp stencil film in place with your thumb, and then pass the tape through...	87
8 Fold the other end of the stamp stencil film over the other side of the stamp film holder and h...	87
9 Fit the stamp frame over the stamp stencil film and push it into place.	87
0 Insert the stamp film holder straight into its cap.	87
LOCAL FORMAT FUNCTION	88
1 Press f, w, e or h to position the cursor in the block that will be given a different format.	88
2 Hold down c and press S once. “BLOCK FORM” appears in the top row of the display to indicate th...	88
3 Select the desired font, size, width, style, underline or frame setting as described on pages8...	88
1 Press f, w, e or h to position the cursor in the shelf number block.	88
2 Hold down c and press S once.	88
3 Press m once.	88
4 Continue pressing m until the I+SHAD style setting is displayed.	89
5 Press _.	89
FONT FUNCTION	89
1 Press k once to display the current font setting.	89
2 Continue pressing k until the desired font setting is displayed.	89
3 Press _ to apply the selected font setting to the text.	89
1 Press k once.	89
2 Continue pressing k until FONT 2 is displayed.	90
3 Press _.	90
SIZE & WIDTH FUNCTIONS	90
1 Press l once to display the current size setting.	91
2 Continue pressing l until the desired size setting is displayed.	91
3 Press _ to apply the selected size setting to the text.	91
1 Press l once.	92
2 Continue pressing l until 24 is displayed.	92
3 Press _.	92
1 Press n once to display the current width setting.	92
2 Continue pressing n until the desired width setting is displayed.	92
3 Press _ to apply the selected width setting to the text.	92
1 Press n once.	92
2 Continue pressing n until WIDE is displayed.	92
3 Press _.	92
STYLE FUNCTION	93
1 Press m once to display the current style setting.	93
2 Continue pressing m until the desired style setting is displayed.	93
3 Press _ to apply the selected style setting to the text.	93
1 Press m once.	93
2 Continue pressing m until I+SHAD is displayed.	93
3 Press _.	93
UNDERLINE FUNCTION	95
1 While holding down c, press 5 once, and keep c held down to display the current underline setting.	95
2 While still holding down c, continue pressing 5 until the desired underline setting is displayed.	95
3 Release c to apply the selected underline setting to the text.	95
1 While holding down c, press 5 once, and keep c held down.	95
2 While still holding down c, continue pressing 5 until ON1 is displayed.	96
3 Release c.	96
FRAME FUNCTION	96
1 While holding down c, press 6 once, and keep c held down to display the current frame setting.	96
2 While still holding down c, continue pressing 6 until the desired frame setting is displayed.	96
3 Release c to apply the selected frame setting to the text.	96
1 While holding down c, press 6 once, and keep c held down.	96
2 While still holding down c, continue pressing 6 until the candy frame is displayed.	97
3 Release c.	97
TAPE MARGIN FUNCTION	98
1 While holding down c, press E once, and keep c held down to display the current tape margin set...	98
2 While still holding down c, continue pressing E until the desired tape margin setting is displa...	98
3 Release c to apply the selected tape margin setting to the entire text.	98
1 While holding down c, press E once, and keep c held down.	98
2 While still holding down c, continue pressing E until HALF is displayed.	99
3 Release c.	99
HORIZONTAL ALIGNMENT FUNCTION	99
1 While holding down c, press R once, and keep c held down to display the current horizontal alig...	99
2 While still holding down c, continue pressing R until the desired horizontal alignment setting ...	99
3 Release c to apply the selected horizontal alignment setting to the entire text.	99
1 While holding down c, press R once, and keep c held down.	100
2 While still holding down c, continue pressing R until RIGHT is displayed.	100
3 Release c.	100
MIRROR PRINTING FUNCTION	100
1 While holding down c, press p once, and keep c held down to display the current mirror printing...	100
2 While still holding down c, continue pressing p until the desired mirror printing setting is di...	100
3 Release c to apply the selected mirror printing setting to the entire text.	100
1 While holding down c, press p once, and keep c held down.	101
2 While still holding down c, continue pressing p until ON is displayed.	101
3 Release c.	101
LENGTH FUNCTION	101
1 While holding down c, press T once, and keep c held down to display the current length of the l...	101
2 While still holding down c, continue pressing T until the desired label length setting is displ...	101
3 Release c. If ON was selected, the current label length setting is displayed.	101
4 Press e or h to select the desired length or use the number keys to enter a length.	101
5 Press _.	102
1 While holding down c, press T once, and keep c held down.	102
2 While still holding down c, continue pressing T until ON is displayed.	102
3 Release c.	102
4 Press e until 5.0 inch is displayed.	102
5 Press _.	102
BARCODE FUNCTION	102
1 Hold down c and press Y once.	103
2 Type in the new barcode data or edit the old data.	103
3 Press e.	103
4 Press f or w until the parameter that you wish to change appears.	103
5 Press e or h until the desired setting is displayed.	103
6 Repeat steps 4 and 5 until all parameters are set as you wish.	103
7 Press _.	103
8 Press f or w until the cursor is below the character immediately to the right of where you wish...	103
9 Hold down c and press a.	103
0 Press e or h until the desired special character is displayed.	103
A Press _ to add the selected special character to the barcode data.	104
B Press _.	105
1 Hold down c and press Y once.	105
2 Press e.	105
3 Press f or w until the CH.DIG. parameter is displayed.	105
4 Press e or h until ON is displayed.	105
5 Press _.	105
6 Press 1, 2, 3, then 4.	105
7 Press _.	105
TZ CUT FUNCTION	106
1 While holding down c, press Z once, and keep c held down to display the current TZ cut setting.	106
2 While still holding down c, continue pressing Z until the desired TZ cut setting is displayed.	106
3 Release c to apply the selected TZ cut setting.	106
1 While holding down c, press Z once, and keep c held down.	106
2 While still holding down c, continue pressing Z until ON is displayed.	106
3 Release c.	106
PRINT KEY	107
FEED & CUT FUNCTION	107
NUMBERING FUNCTION	108
1 Hold down c and press O. The message “START?” appears in the display.	108
2 Press f, w, e or h until the first character that you wish to select for the numbering field is...	108
3 Press _. The message “END?” appears in the display.	108
4 Press f, w, e or h until all of the characters that you wish to select for the number field are...	108
5 Press _. The message “NUMBER” appears in the display.	108
6 Press e or h until the desired number of copies is displayed, or use the number keys to type in...	109
7 Press p (or _).	109
8 Press e or h until the desired setting (EACH LABEL or AFTER LAST) is displayed. If EACH LABEL i...	109
9 Press p or _ to begin printing the labels. The number of the copy being printed is displayed.	109
1 Hold down c and press O.	109
2 Press _.	109
3 Make sure that just “1” is flashing, and then press _.	109
4 Press 3.	109
5 Press p (or _).	110
If TZ tape is being printed on:	110
6 Press p (or _).	110
REPEAT PRINTING FUNCTION	111
1 Hold down c and press I. The message “COPIES” appears in the display with the default setting 1...	111
2 Press e or h until the desired number of copies is displayed, or use the number keys to type in...	111
3 Press p (or _)	111
4 Press e or h until the desired setting (EACH LABEL or AFTER LAST) is displayed. If EACH LABEL i...	111
5 Press p (or _) to begin printing the labels. The number of the copy being printed is displayed.	111
1 Hold down c and press I.	112
2 Press 3.	112
3 Press p (or _).	112
If TZ tape is being printed on:	112
4 Press p (or _).	113
MEMORY FUNCTIONS	113