Brother International SE-270D Users Manual - English - Page 32

GETTING READY Insert the thread cassette into the thread b cassette compartment. Slowly press down on the thread cassette until it clicks into place. X At the same time that the thread cassette is inserted, the needle is threaded. X The thread cassette indicator goes off. • If any of the following operations are performed, the needle may not be threaded or the machine may be damaged. 1 a Push here 1 a Needle bar thread hooks 26 ✕ Pushing the cassette down too fast ✕ Pushing down on a part of the cassette other than the gray area ✕ Inserting the cassette ✕ Inserting the cassette only partway, then partway and pausing pulling it out before fully inserting it • If the needle could not be threaded or the thread was not passed through the needle bar thread hook, refer to "Loading the spool into the thread cassette" (page 22) and perform the procedure again starting from step b. • The thread cassette can be inserted whenever the presser foot lever is raised or lowered. However, when the side cutter is attached, be sure to lower the presser foot lever before installing the thread cassette. For more details, refer to "Sewing overcasting stitches using the optional side cutter" (page 71). CAUTION ● The needle threader will automatically thread the needle when the thread cassette is pushed down. Be sure to keep your hands and other items away from the needle, otherwise injuries may occur.