Brother International TD-2135NWB Users Guide TD-2020A/2125NWB/2135NWB - Page 13
Inserting the Media Roll
![]() |
View all Brother International TD-2135NWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Inserting the Media Roll 2 We recommend using genuine Brother Media Roll. Genuine Brother fanfold media is not available at this time. a Press and hold the (Power) button to turn the printer off. Press the cover release lever (1) on either side and lift to open the Media Roll compartment top cover. Printing c Insert the Media Roll into the Media Roll compartment, and then close the Media Roll compartment top cover. For Media Roll 1 Insert the Media Roll so that the 2 labels feed with the side to be printed on facing up (1), as shown. 1 1 b Open the media guides by lifting the media guide adjustment lever (1) and pulling the media guides outwards. 1 NOTE The media guides are shipped fully open from the factory. Use Media Rolls with an outer roll dimension of 5" (127 mm) or less. Use Media Rolls designed for TD series printers. Regardless of the size, some Media Rolls may not be compatible. Insert the Media Roll facing the correct direction. If the Media Roll is not inserted correctly, the printer will not print on the correct side of the paper or label. When using media with the labels rolled up on the inside, insert the roll in the opposite direction of that shown in sub-step 1 of step c so that the print side of the labels will face up. 7
![](/manual_guide/products/brother-international-td2125n-users-guide-td2020a2125nwb2135nwb-3560220/13.png)