Brother International TD-2135NWB Users Guide TD-2020A/2125NWB/2135NWB - Page 60

Printer Setting Tool, Problem, Solution, Checking the Sensor Position, Printer Driver Settings

Get Brother International TD-2135NWB PDF manuals and user guides View all Brother International TD-2135NWB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Chapter 7 Problem Solution I want to reset the printer. To reset the printer, perform the following procedure: I want to delete the data transferred from 1 Press and hold the (Power) button to turn the printer off. the computer. 2 Simultaneously, press and hold the (Feed) button and the (Power) button until the POWER indicator lights in orange and the STATUS indicator blinks in green. 3 While pressing the (Power) button, press the (Feed) button six times. 4 Release the (Power) button. All of the transferred data from the computer will be deleted, and the printer will be reset to its factory settings. I want to cancel the current print job. I want to reset the incrementing field. Make sure that this printer is turned on, and then press the (Power) button. Press and hold the (Print) button for at least five seconds, until the POWER and STATUS indicators blink in orange three times. The media cannot be fed to the beginning  If a feed error occurred, use the Custom Label Tool to apply of a label. the correct paper settings to the printer.  Are the media sensors in the correct position? Check that the sensors are correctly positioned. For more information, see Checking the Sensor Position on page 9. Data is being sent to the printer, but the Make sure that the USB cable is connected securely. Try using POWER indicator is not flashing green. another USB cable. (TD-2125NWB/2135NWB only) The labels are not peeling correctly (when using the optional Label Peeler). For WLAN or Bluetooth connection, check that the appropriate LED indicator is lit.  Make sure that the paper is correctly fed through the label peeler.  Has the peeler option setting been specified in the printer driver and with the "Printer Setting Tool"? For more information, see Printer Driver Settings on page 91 or Media Sensor (Peeler) (TD-2125N/2135N/ 2125NWB/2135NWB only) on page 31. The media is not ejected correctly (when using the optional label peeler). Has the label peeler sensor been exposed to direct sunlight? If so, loaded media may not be detected correctly. Move the printer in a location not exposed to direct sunlight. 54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
Chapter 7
54
I want to reset the printer.
I want to delete the data transferred from
the computer.
To reset the printer, perform the following procedure:
1
Press and hold the
(Power) button to turn the printer off.
2
Simultaneously, press and hold the
(Feed) button and
the
(Power) button until the POWER indicator lights in
orange and the STATUS indicator blinks in green.
3
While pressing the
(Power) button, press the
(Feed)
button six times.
4
Release the
(Power) button.
All of the transferred data from the computer will be deleted,
and the printer will be reset to its factory settings.
I want to cancel the current print job.
Make sure that this printer is turned on, and then press the
(Power) button.
I want to reset the incrementing field.
Press and hold the
(Print) button for at least five seconds,
until the POWER and STATUS indicators blink in orange three
times.
The media cannot be fed to the beginning
of a label.
If a feed error occurred, use the Custom Label Tool to apply
the correct paper settings to the printer.
Are the media sensors in the correct position?
Check that the sensors are correctly positioned. For more
information, see
Checking the Sensor Position
on page 9.
Data is being sent to the printer, but the
POWER indicator is not flashing green.
Make sure that the USB cable is connected securely. Try using
another USB cable.
(TD-2125NWB/2135NWB only)
For WLAN or Bluetooth connection, check that the appropriate
LED indicator is lit.
The labels are not peeling correctly
(when using the optional Label Peeler).
Make sure that the paper is correctly fed through the label
peeler.
Has the peeler option setting been specified in the printer
driver and with the “
Printer Setting Tool
”?
For more information, see
Printer Driver Settings
on page 91 or
Media Sensor (Peeler) (TD-2125N/2135N/
2125NWB/2135NWB only)
on page 31.
The media is not ejected correctly (when
using the optional label peeler).
Has the label peeler sensor been exposed to direct sunlight?
If so, loaded media may not be detected correctly. Move the
printer in a location not exposed to direct sunlight.
Problem
Solution