Brother International TD-4000 Users Manual - English and Spanish - Page 17
Connecting the Power Supply
View all Brother International TD-4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
11 Introduction 6 Connecting the Power Supply • Check that the electrical outlet is 120V AC before plugging the power cord. • Do not connect the TD-4000/4100N to the computer until directed to do so when installing the printer driver. • Unplug the power cord from the electrical outlet after you have finished using the TD-4000/4100N. • Do not pull the power cord when unplugging it from the electrical outlet. The wire in the power cord may become damaged. 1 Check that the main power switch is turned off. STEP 1 Getting started 2 Connect the power cord to the TD-4000/4100N. Off STEP 2 Installing the software 3 Plug the power cord into an electrical outlet. 4 Turn the main power switch on. The plug may differ by countries. STEP 3 Reference
11
STEP
1
STEP
2
STEP
3
Getting started
Reference
Installing the software
Introduction
•
Check that the electrical outlet is 120V AC before plugging the power cord.
•
Do not connect the TD-4000/4100N to the computer until directed to do so when
installing the printer driver.
•
Unplug the power cord from the electrical outlet after you have finished using the
TD-4000/4100N.
•
Do not pull the power cord when unplugging it from the electrical outlet. The wire in
the power cord may become damaged.
1
Check that the main power switch is turned
off.
2
Connect the power cord to the
TD-4000/4100N.
3
Plug the power cord into an electrical outlet.
4
Turn the main power switch on.
6
Connecting the Power Supply
Off
The plug may differ by countries.