Brother International TD-4000 Users Manual - English and Spanish - Page 32
Controlling with the ESC/P Commands, Available Commands, Serial Cables
View all Brother International TD-4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
26 STEP2 Installing the software Installing the Software 4 Controlling Commands with the ESC/P Fonts and several bar codes are embedded within this machine. You can send commands to print embedded characters and barcodes. Available Commands Commands available are Brother TD proprietary commands based on ESC/P. The latest command tool can be downloaded from the following website. http://solutions.brother.com [Select your region/country] - [Choose your product] - [Downloads] Serial Cables The pin assignments for the serial cables (RS-232C cables) which can be used with this machine are shown in the table below. You can purchase the cables at an electronics store. Do not use an interface cable that is longer than 6 feet (2.0 meters). Brother TD side (D-sub female, lock screw #4-40 inch screw) PC side (D-Sub9P female) Signal Name DCD RXD TXD DTR GND DSR RTS CTS RI Pin Number 1 2 3 4 5 6 7 8 9 Pin Assignments Pin Number 1 2 3 4 5 6 7 8 9 Signal Name DCD RXD TXD DTR GND DSR RTS CTS RI • It is not possible to connect a RS-232C cable and USB cable to the printer at the same time. • The RS-232C serial connector part of this equipment is not Limited Power Source.