Brother International TD-4100N Users Manual - English and Spanish - Page 20
Using Interface Cables
View all Brother International TD-4100N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
14 STEP1 Getting started 8 Using Interface Cables RS-232C cable and Network cable are not standard accessories. Select the appropriate cable for the interface. • USB cable Use the enclosed interface cable. • RS-232C cable Do not use an interface cable that is longer than 6 feet (2.0 meters). For details, see "Controlling with the ESC/P Commands" on page 26. • Network cable (TD-4100N) Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network. Important For USB interface, the included USB interface cable should be used to ensure compliance with the limits for EMC. For serial and network interfaces, a shielded interface cable should be used to ensure compliance with the limits for EMC. Changes or modifications not expressly approved by Brother Industries, Ltd. may affect the performance and print quality, and damage may not be covered under the limited warranty. • Caution for LAN connection Connect this product to a LAN connection that is not subjected to overvoltages. • Caution for RS-232C connection The RS-232C serial connector part of this equipment is not Limited Power Source.