Home » Brother International Manuals » Label Makers » Brother International TD-4420DN » Manual Viewer

Brother International TD-4420DN P-touch Template Manual/ Command Reference - Page 33

D barcodes, The Code Spacing and Join Vertically in the Set Structured Append settings

View all Brother International TD-4420DN manuals

Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

P-touch Template 2.0 Command Reference 4.2.3 2D barcodes  Margin setting in the P-touch Editor is ignored. It is only changed by Barcode margin setting command (ESC iXE2).  Other limitations are as follows. QR Code PDF417 Data Matrix Maxi Code Aztec GS1 Databar Composite The version setting for a QR Code specified in P-touch Editor is invalid. The version setting must be turned off. The Structured Append settings specified in P-touch Editor are invalid. Since the error correction levels for PDF417 specified in P-touch Editor are inconsistent with those on the printer, the size of the barcode may change when it is printed with P-touch Template 2.0. The Structured Append settings specified in P-touch Editor are invalid. The Structured Append settings specified in P-touch Editor are invalid. Macro settings specified in P-touch Editor are invalid The Structured Append settings specified in P-touch Editor are invalid. The barcode is partitioned when too much data is entered. When specifying the country code and service class with P-touch Editor, the number is entered at the beginning if the maximum number of characters is not reached. However, with the printer, the number is entered at the end. Example: "2" is specified. P-touch Editor: "200"; Printer: "002" The Remove Character setting specified in P-touch Editor is invalid. The Code Spacing and Join Vertically in the Set Structured Append settings specified in P-touch Editor are invalid. Following models are supported. - GS1 Databar Omni CC-A/CC-B - GS1 Databar Truncated CC-A/CC-B - GS1 Databar Stacked CC-A/CC-B - GS1 Databar Stacked Omni CC-A/CC-B - GS1 Databar Limited CC-A/CC-B - GS1 Databar Expanded CC-A/CC-B - GS1 Databar Expanded Stacked CC-A/CC-B When inserting data, please add the data "01" to the beginning of data. The setting "Add 01 on the head of data" of the P-touch Editor is not affected. In addition, 1D barcode data and 2D code data must be separated by '|'. Ex) 1D barcode data is "12345", 2D code data is "67890": Please insert "0112345|67890". - 27 - 4. P-touch Template 2.0 Limitations

Section	Page
P-touch Template 2.0 Command Reference	1
IMPORTANT - PLEASE READ CAREFULLY	3
Note	3
Condition of Use	3
No Warranty	3
Introduction	7
What is P-touch Template 2.0?	8
1. Using P-touch Template 2.0	9
2. P-touch Template Settings Tool User’s Guide	10
3. Examples for Using Commands	16
3.1 Example for using P-touch Template 2.0	16
3.2 Example for using ZPL II in P-touch Template 2.0	21
3.3 Example for printing logo/external characters in P-touch Template 2.0	24
4. P-touch Template 2.0 Limitations	27
4.1 Relating to text objects	27
4.1.1 Font, size, etc.	27
4.1.2 Character alignment	28
4.1.3 Text Layout settings	29
4.2 Relating to barcodes	31
4.2.1 Barcodes	31
4.2.2 1D barcodes	32
4.2.3 2D barcodes	33
4.3 Relating to images	34
4.4 Relating to Numbering	34
4.5 Relating to Database	34
4.6 Others	35
4.6.1 Transferring templates	35
4.6.2 About objects in a template	35
5. Precautions	36
5.1 Notes on using static commands	36
5.2 Notes for printers with Bluetooth interface	36
5.3 Relationship between the P-touch Editor settings and the printer image	37
5.4 Making a template in order to save time before starting to print	38
6. Control Code Lists	39
6.1 Setting and retrieving commands for P-touch Template mode	39
6.2 Common commands	40
6.3 Raster commands	42
7. Control Command Details	43
^PT Select print start trigger	43
^FF Start printing	44
^PS Specify print start command text string	45
^PC Specify print start received character count	46
^SS Specify delimiter	47
^TS Select template	48
^CO Select cut options	49
^LS Specify line spacing with line feed	50
^CC Change the prefix character	51
^RC Specify line feed command text string	52
^CN Specify number of copies	53
^NN Specify number of Numbering copies	54
^ID Initialize template data	54
^QS Select print options	55
^QV Specify QR Code version	56
^FC FNC1 replacement setting	57
^II Initialize	58
^OP Perform printer operation (feed)	59
^SR Status request	60
^VR Retrieve version information	64
^CR Line feed in object	65
^OS Select object (object number)	66
^ON Select object (object name)	67
^DI Directly insert object	68
ESC i a Select command mode	69
ESC iXT2 Select print start trigger	70
ESC iXP2 Specify print start command text string	71
ESC iXr2 Specify print start received character count	72
ESC iXD2 Specify delimiter	73
ESC iXa2 Specify non-printed text strings	74
ESC iXi2 Select command mode	75
ESC iXn2 Select template	76
ESC iXf2 Change the prefix character	77
ESC iXc2 Select cut options	78
ESC iXy2 Select cut options (specifying number of labels)	79
ESC iXm2 Select character code set	80
ESC iXj2 Select international character set	81
ESC iXR2 Specify line feed command text string	82
ESC iXC2 Specify number of copies	83
ESC iXN2 Specify number of Numbering copies	84
ESC iXF2 FNC1 replacement setting	85
ESC iXd2 Specify recovery setting	86
ESC iXv2 (0Ch) Specify number of recovery	87
ESC iXE2 Specify barcode margin setting	88
ESC iXh2 Specify rotated print	89
ESC iX^2 Specify print stop position	90
ESC iXv2 (08h) Specify WLAN communication mode of Raw port	91
ESC iOUe1　Specify the string of text decoration tags	92
ESC iXT1 Retrieve print start trigger setting	93
ESC iXP1 Retrieve print start command setting text string	94
ESC iXr1 Retrieve print start received character count	95
ESC iXD1 Retrieve delimiter	96
ESC iXa1 Retrieve non-printed text strings	97
ESC iXi1 Retrieve command mode setting	98
ESC iXn1 Retrieve number of selected template	99
ESC iXc1 Retrieve cut options	100
ESC iXy1 Retrieve cut options (specifying number of labels)	101
ESC iXm1 Retrieve character code set setting	102
ESC iXj1 Retrieve international character set setting	103
ESC iXf1 Retrieve prefix character	104
ESC iXR1 Retrieve line feed command setting text string	105
ESC iXC1 Retrieve number of copies setting	106
ESC iXN1 Retrieve number of Numbering copies setting	107
ESC iXF1 Retrieve FNC1 replacement setting	108
ESC iXd1 Retrieve recovery setting	109
ESC iXv1 (0Ch) Retrieve number of recovery	110
ESC iXE1 Retrieve barcode margin setting	111
ESC iXh1 Retrieve rotated print setting	112
ESC iX^1 Retrieve print stop position	113
ESC iXv1 (08h) Retrieve WLAN communication mode of Raw port	114
ESC iOUe0　Retrieve the string of text decoration tags	115
8. ZPL II supported by RJ-4XXX/TD-4XXX	116
9. CPCL Supported by RJ-4XXX/TD-4XXX	119
Appendix A: Supported Printers	128
Appendix B: Specifications	129
Appendix C: Character Code Tables	131
Character code tables	131
International character set table	135
Appendix D: Troubleshooting	136
If printing does not begin (main most frequent cause)	136
If a template linked to a database is not printed	136
Appendix E: Introducing the Brother Developer Center	137

Match case Limit results 1 per page

P-touch Template 2.0 Command Reference

- 27 -

4. P-touch Template 2.0 Limitations

4.2.3 2D barcodes



Margin setting in the P-touch Editor is ignored. It is only changed by Barcode margin setting command

(ESC iXE2).



Other limitations are as follows.

QR Code

The version setting for a QR Code specified in P-touch Editor is invalid. The

version setting must be turned off.

The Structured Append settings specified in P-touch Editor are invalid.

PDF417

Since the error correction levels for PDF417 specified in P-touch Editor are

inconsistent with those on the printer, the size of the barcode may change when

it is printed with P-touch Template 2.0.

The Structured Append settings specified in P-touch Editor are invalid.

Data Matrix

The Structured Append settings specified in P-touch Editor are invalid.

Macro settings specified in P-touch Editor are invalid

Maxi Code

The Structured Append settings specified in P-touch Editor are invalid.

The barcode is partitioned when too much data is entered.

When specifying the country code and service class with P-touch Editor, the

number is entered at the beginning if the maximum number of characters is not

reached. However, with the printer, the number is entered at the end.

Example: “2” is specified.

P-touch Editor: “200”; Printer: “002”

Aztec

The Remove Character setting specified in P-touch Editor is invalid.

The Code Spacing and Join Vertically in the Set Structured Append settings

specified in P-touch Editor are invalid.

GS1 Databar

Composite

Following models are supported.

GS1 Databar Omni CC-A/CC-B

GS1 Databar Truncated CC-A/CC-B

GS1 Databar Stacked CC-A/CC-B

GS1 Databar Stacked Omni CC-A/CC-B

GS1 Databar Limited CC-A/CC-B

GS1 Databar Expanded CC-A/CC-B

GS1 Databar Expanded Stacked CC-A/CC-B

When inserting data, please add the data “01” to the beginning of data. The

setting “Add 01 on the head of data” of the P-touch Editor is not affected.

In addition, 1D barcode data and 2D code data must be separated by ‘|’.

Ex) 1D barcode data is “12345”, 2D code data is ”67890”:

Please insert “0112345|67890”.