Brother International TD-4420DN P-touch Template Manual/ Command Reference - Page 72
ESC iXr2 Specify print start received character count, 00h≤nh3≤FFh
![]() |
View all Brother International TD-4420DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
P-touch Template 2.0 Command Reference ESC iXr2 Specify print start received character count ASCII: ESC i X r 2 n1 n2 n3 n4 Decimal: 27 105 88 114 50 nd1 nd2 nd3 nd4 Hexadecimal: 1B 69 58 72 32 nh1 nh2 nh3 nh4 Parameters nh1: 02h (Fixed) nh2: 00h (Fixed) 00h≤nh3≤FFh 00h≤nh4≤03h Description Specifies the number of characters to be received in order to start printing. nh3+(nh4*256): Print start received character count (1 to 999) The default print start received character count is 10. This command is a static command. If Unicode(UTF-8) mode is being used, maximum 4 bytes are used as 1 character. Example To change the print start received character count to 100 characters: Since nh3=64h and nh4=00h, the command will be as follows. ESC i X r 2 02h 00h 64h 00h (1Bh 69h 58h 72h 32h 02h 00h 64h 00h) - 66 - 7. Control Command Details
![](/manual_guide/products/brother-international-td4410d-ptouch-template-manual-command-reference-b46d9ff/72.png)