Brother International TD-4420DN P-touch Template Manual/ Command Reference - Page 57
^FC FNC1 replacement setting, 0≤n≤1
![]() |
View all Brother International TD-4420DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
P-touch Template 2.0 Command Reference ^FC FNC1 replacement setting ASCII: ^ F Cn Decimal: 94 70 67 nd Hexadecimal: 5E 46 43 nh Parameters 0≤n≤1 Description Selects whether or not GS codes, which are included in barcode protocols such as GS1-128 (UCC/EAN-128), are replaced with FNC1 codes. n: FNC1 replacement setting (ON: 1; OFF: 0 (default)) This command is a dynamic command. Remarks Invalid if n is a value other than 1 or 0 Example To disable FNC1 replacement: Since FNC1 replacement will be disabled, n=0. Therefore, the command will be as follows. ^ F C 0 (5Eh 46h 43h 30h) - 51 - 7. Control Command Details
![](/manual_guide/products/brother-international-td4410d-ptouch-template-manual-command-reference-b46d9ff/57.png)
P-touch Template 2.0 Command Reference
- 51 -
7. Control Command Details
^FC
FNC1 replacement setting
ASCII:
^
F
C
n
Decimal:
94
70 67 nd
Hexadecimal: 5E
46 43 nh
Parameters
0≤n≤1
Description
Selects whether or not GS codes, which are included in barcode protocols such as GS1-128
(UCC/EAN-128), are replaced with FNC1 codes.
n: FNC1 replacement setting
(ON: 1; OFF: 0 (default))
This command is a dynamic command.
Remarks
Invalid if n is a value other than 1 or 0
Example
To disable FNC1 replacement:
Since FNC1 replacement will be disabled, n=0. Therefore, the command will be as follows.
^ F C 0
(5Eh 46h 43h 30h)