Brother International VX-940 Users Manual - English - Page 28
Shell, Scallop, Stitch
View all Brother International VX-940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Shell Tack PATTERN SELECTOR STITCH LENGTH STITCH WIDTH PRESSER FOOT NEEDLE PRESSURE ADJUSTER : 7 (Shell Tack) : 2-4 3 - 5 : Zigzag Single : According to the Material This stitch can be used for sewing a picoted edge on a light material. 1. Sew material on bias, placing material under the presser foot so that straight stitches are sewn on seam line and zigzag stitches are sewn slightly over seam edge. 2. This work requires a little tighter upper thread tension than normal. 3. Sew at slow speed. 4. Edge of material will be picoted. Scallop Stitch PATTERN SELECTOR STITCH LENGTH STITCH WIDTH PRESSER FOOT NEEDLE PRESSURE ADJUSTER : 9 (Scallop Stitch) F'1 3 - 5 Zigzag : Single or Twin Needle : According to the Materials This' machine produces decorative stitch (Scallop) automatically. The "Scallop Stitch" may be used as a decorative edging. 1. Sew scallop stitch along edge of material. 2. If desired, trim around scallop with scissors to create a scallop edge. NOTE: If twin needle sewing is used, set zigzag width dial at under "3". - 26 -