Campbell Scientific CS616 CS616 and CS625 Water Content Reflectometers - Page 17
Sample Programs for CS625
View all Campbell Scientific CS616 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
CS616 and CS625 Water Content Reflectometers Timeout: The Timeout parameter is the maximum time duration, in milliseconds, that the datalogger will wait for the number of Cycles to be measured for the average calculation. An overrange value will be stored if the Timeout period is exceeded. A value of 1 is recommended if 10 is used for cycles parameter. Port: The Port parameter is the control port or analog channel that will be used to switch power to the CS625 Water Content Reflectometer. Valid options are: Code 0 C1 C2 3 4 5 P_SW Description None Control Port 1 Control Port 2 Analog Channel 3 Analog Channel 4 Analog Channel 5 Analog Channel 6/P_SW Mult, Offset: The Mult and Offset parameters are each a constant, variable, array, or expression by which to scale the results of the raw measurement. A multiplier value of 1 is recommended. 6.4.3 Sample Programs for CS625 TABLE 6-2. CS625 Sample Programs Sample Program Number 1 2 Program Description Measure volumetric water content with 4 CS625 hourly. Store average hourly readings to final storage every 4 hours. Measure temperature with 109 probe and use the 109 temperature to correct the period for 1 CS625. Use standard calibration equation to convert temperature-corrected period to volumetric water content. Sensors are read hourly and average water content and temperature are written to storage every 4 hours. 6.4.3.1 CS625 Sample Program 1 Hourly measure temperature with 109 probe and volumetric water content with 4 CS625. Store average hourly readings to final storage every 4 hours. CS625 leads CR200(X) greens Single-Ended Channel 1 thru 4 (SE1-4) blacks associated grounds for SE1-4 oranges Control Port 1 (C1) reds SW Battery clears G 11