Campbell Scientific RAVENXTV RavenXTV CDMA Sierra Wireless Cellular Modem - Page 13
Modem Connections Using the SC105, RavenXTV CDMA Sierra Wireless Cellular Modem,
View all Campbell Scientific RAVENXTV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
RavenXTV CDMA Sierra Wireless Cellular Modem 4.3.2 Modem Connections Using the SC105 The SC105 interface is used to connect the modem to a datalogger's CS I/O port, and is recommended for dataloggers with the PakBus operating system. Wiring: Red 12V (or switched 12V) Black G White Not Used 10873 serial cable provided with the SC105 SC105 Settings: CS I/O Mode: SDC Address 7 RS-232 Mode: Modem Baud Rate: 115.2K or 9600 baud depending on datalogger model 8 data bits, 1 stop bit, no parity FIGURE 4-3. Connections using the SC105 7
RavenXTV CDMA Sierra Wireless Cellular Modem
4.3.2 Modem Connections Using the SC105
.3.2 Modem Connections Using the SC105
The SC105 interface is used to connect the modem to a datalogger’s CS I/O
port, and is recommended for dataloggers with the PakBus operating system.
The SC105 interface is used to connect the modem to a datalogger’s CS I/O
port, and is recommended for dataloggers with the PakBus operating system.
Wiring:
Red
12V (or
switched 12V)
Black
G
White
Not Used
10873 serial cable
provided with the SC105
SC105 Settings:
CS I/O Mode: SDC Address 7
RS-232 Mode: Modem
Baud Rate: 115.2K or 9600 baud depending on datalogger model
8 data bits, 1 stop bit, no parity
FIGURE 4-3.
Connections using the SC105
7