Campbell Scientific RAVENXTV RavenXTV CDMA Sierra Wireless Cellular Modem - Page 20
Configuring the Raven for Dynamic IP, MODEMNAME, DOMAIN, IPMANAGER1, IPMGRUPDATE1
![]() |
View all Campbell Scientific RAVENXTV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
RavenXTV CDMA Sierra Wireless Cellular Modem WARNING Unless you Write the commands, the changes made in New Value will not be sent to the modem. For some commands unless you Reset the modem, the newly written values will not take effect. 5.1 Configuring the Raven for Dynamic IP Dynamic IP addresses are granted only when a modem or other device is connected. The address can change each time the modem or device reconnects to the network. IP Manager is a free service provided by Sierra Wireless for the Raven to translate a dynamic IP address into a fully qualified domain name so it can be contacted directly on the Internet. IP Manager translates a dynamic IP address to a fully qualified domain name so you can contact your Raven by name as if it had a static IP. If the Raven is configured for Dynamic IP, when the Raven first connects to the Internet, it sends an IP change notification to IP Manager. IP Manager will acknowledge the change and update the dynamic DNS record. The changed IP address will then be the address for the Raven's configured name. Once the Raven's IP has been updated in IP Manager, it can be contacted via name. AceManager is used to configure the Dynamic IP settings in your Raven so that it will use IP Manager as described below. Connect with modem using AceManager. Select the Dynamic IP group to configure your modem to use IP Manager. To configure your Sierra Wireless modem to be addressed by name, the modem needs to have four elements configured. Enter names in the New Value fields for MODEMNAME, DOMAIN, IPMANAGER1, IPMANAGER2, and IPMGRUPDATE1. 14
![](/manual_guide/products/campbell-scientific-ravenxtv-ravenxtv-cdma-sierra-wireless-cellular-modem-ef86de2/20.png)