Campbell Scientific RAVENXTV RavenXTV CDMA Sierra Wireless Cellular Modem - Page 25

Configuring the Raven for Dynamic, Configuring the Raven Modem for PPP, Configuring the Raven

Get Campbell Scientific RAVENXTV PDF manuals and user guides View all Campbell Scientific RAVENXTV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

RavenXTV CDMA Sierra Wireless Cellular Modem g. If you have a Dynamic IP account, you will need to have a DDNS (dynamic domain name server) name that LoggerNet can reference to make the connection (Section 5.1, Configuring the Raven for Dynamic IP). 2. Connect with the modem through the serial port using AceManager. a. If the modem has been configured for "PPP" (see Appendix B, Configuring the Raven Modem for PPP), then you may have to check the "Use SOS Mode" box. b. From the "Status" group, make sure the "Network State" is "Network Ready", and note the "Network IP" address. This is the current IP address for the modem (a dynamic IP address will change each time the modem is reset). Try connecting to this IP address using LoggerNet. If LoggerNet connects with the IP address, but not with the modem name.domain name, then there may be a problem with the Dynamic IP setup in the modem (Section 5.1, Configuring the Raven for Dynamic IP). 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
RavenXTV CDMA Sierra Wireless Cellular Modem
g.
If you have a Dynamic IP account, you will need to have a DDNS
(dynamic domain name server) name that LoggerNet can reference to
make the connection (Section 5.1,
Configuring the Raven for Dynamic
IP
).
2.
Connect with the modem through the serial port using AceManager.
a.
If the modem has been configured for “PPP” (see Appendix B,
Configuring the Raven Modem for PPP
), then you may have to check
the “Use SOS Mode” box.
b.
From the “Status” group, make sure the “Network State” is “Network
Ready”, and note the “Network IP” address.
This is the current IP
address for the modem (a dynamic IP address will change each time
the modem is reset).
Try connecting to this IP address using
LoggerNet.
If LoggerNet connects with the IP address, but not with
the modem name.domain name, then there may be a problem with the
Dynamic IP setup in the modem (Section 5.1,
Configuring the Raven
for Dynamic IP
).
19