Campbell Scientific RAVENXTV RavenXTV CDMA Sierra Wireless Cellular Modem - Page 29

Appendix A. AceManager Setup without Template File

Page 29 highlights

Appendix A. AceManager Setup without Template File AceManager is used to program settings in the RavenXT modems to make the modems compatible with CSI dataloggers. Sierra Wireless CDMA and GPRS template files to send the modems are available on the CSI website (www.campbellsci.com/downloads). The procedure for sending the template files is described in Section 5, Using AceManager to Program the Modem. When the template files are not available, AceManager can be used to change the settings described below. For a direct connection on a COM port use PPP. Make a note of the Device port (*DPORT). The default is 12345 and we use 3001 in our template. Any valid port can be used. This is the port number used in LoggerNet to get to the datalogger. A-1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

Appendix A. AceManager Setup
without Template File
AceManager is used to program settings in the RavenXT modems to make the
modems compatible with CSI dataloggers.
Sierra Wireless CDMA and GPRS
template files to send the modems are available on the CSI website
(
www.campbellsci.com/downloads
).
The procedure for sending the template
files is described in Section 5,
Using AceManager to Program the Modem
.
When the template files are not available, AceManager can be used to change
the settings described below.
For a direct connection on a COM port use PPP.
Make a note of the Device port (*DPORT).
The default is 12345 and we use
3001 in our template.
Any valid port can be used.
This is the port number
used in LoggerNet to get to the datalogger.
A-1