Canon 1867B002 Operation Manual - Page 15

Camera Settings

Get Canon 1867B002 - VB C300 Network Camera PDF manuals and user guides
UPC - 013803078046
View all Canon 1867B002 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Detailed Settings Setting Image Size, Quality and Camera Control (Video and Camera) ▼ Camera Settings 1 2 3 4 5 6 7 1 Shutter Speed Select the shutter speed for the camera. NTSC: "Auto", "1/60", and "1/100". PAL: "Auto", "1/ 50", and "1/120". ● The shutter speeds of 1/60 and 1/100 can be used to suppress flicker of fluorescent Note lamp. If video view flicks too much, use "NTSC: 1/100 PAL: 1/120" in the place where commercial frequency is 50 Hz and "NTSC: 1/60 PAL: 1/50" in the place where commercial frequency is 60 Hz. Note that even when one of these shutter speeds is selected, the camera automatically shifts to a higher shutter speed if the exposure is too high with these values. ● Please refer to P.1-8 in the "Start Guide" to confirm whether your VB-C300 is NTSC model or PAL model. 2 Focus Mode Set the focusing mode for the camera. Auto: Adjust the focus automatically. Auto (for domes): When the indoor dome housing (optional) is used, select this mode not to allow the camera to focus on the surface of the dome. Fixed at infinity: Focus is fixed at a point of infinity. If you are using the indoor dome housing other than optional dome housing (VBNote RD41S - C/S) and dust or water drop exists on the surface of the dome, the camera may focus on the dome surface. Be sure to install the camera so that the distance between the dome and camera may be as short as possible. 1-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
1-9
Detailed Settings
▼
Camera Settings
1
Shutter Speed
Select the shutter speed for the camera. NTSC: “Auto”, “1/60”, and “1/100”. PAL: “Auto”, “1/
50”, and “1/120”.
2
Focus Mode
Set the focusing mode for the camera.
Auto:
Adjust the focus automatically.
Auto (for domes):
When the indoor dome housing (optional) is used, select this mode
not to allow the camera to focus on the surface of the dome.
Fixed at infinity:
Focus is fixed at a point of infinity.
7
6
5
4
3
2
1
Setting Image Size, Quality and Camera Control (Video and Camera)
Note
If you are using the indoor dome housing other than optional dome housing (VB-
RD41S - C/S) and dust or water drop exists on the surface of the dome, the camera
may focus on the dome surface. Be sure to install the camera so that the distance
between the dome and camera may be as short as possible.
Note
●
The shutter speeds of 1/60 and 1/100 can be used to suppress flicker of fluorescent
lamp. If video view flicks too much, use “NTSC: 1/100 PAL: 1/120” in the place
where commercial frequency is 50 Hz and “NTSC: 1/60 PAL: 1/50” in the place
where commercial frequency is 60 Hz. Note that even when one of these shutter
speeds is selected, the camera automatically shifts to a higher shutter speed if the
exposure is too high with these values.
●
Please refer to P.1-8 in the “Start Guide” to confirm whether your VB-C300 is
NTSC model or PAL model.