Canon 1867B002 Operation Manual - Page 67

2. Click "Add" from the Camera List dialog. Overview of NC Viewer Operation NC Viewer and Viewer Switcher 3. A Register Camera (Add) dialog box to select a camera appears. 1 Enter connection settings and click "OK" to add the camera to the list. 2 1 Nickname 3 Enter a name for register a camera (You 4 can use up to 32 alphanumeric characters). 5 2 Host Name Enter the IP address or host name set on 6 the camera (→ P.1-17). 7 3 User Name Enter the user name to connect to the camera. Users can authorized users registered on the camera (→ P.1-15) or administrator "root". 4 Password Enter the password for the specified user name. 5 HTTP Port Enter the HTTP port number set on the camera (→ P.1-12). Use default setting (80) if you do not need to change. 6 Send and Receive audio Check this box and connect a microphone and speaker with amp to the camera if you want to send and receive audio via the NC Viewer (→ P.3-23). Authorized User can only receive audio. You need other settings to transmit or receive audio (→ P.1-14). 7 Remember Password Check this option to save the password. If Administrator and Authorized User use the NC Viewer from the same PC, it is Note strongly recommended not to check the Remember Password option. 3-23