Canon 430EXII Instruction manual - Page 20
Setting the Flash Coverage, Using the Wide Panel
![]() |
View all Canon 430EXII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ZOOM:Setting the Flash Coverage and Usingthe Wide Panel ma The flash coverage can be set to match the lens focal length from 24mm to 105mm. The flash coverage can be set automatically or manually. Also, with the built-in wide panel, the flash coverage will be compatible with ultra wide-angle lenses as short as 14mm. Press the button. "r Press the button to change the flash coverage. r If is not displayed, the flash coverage will be set automatically. a If you set the flash coverage manually, make sure it covers the lens focal length so that the picture will not have a dark periphery. Y Using the Wide Panel ~ P l Pull out the wide panel and place it as shown. e The button will not work. a CO s The flash coverage will not be compatible with the EF15mm f12.8 Fisheye lens. For the effective lens focal length (or crop factor). refer to the camera's 0 .instruction manual. If you use bounce flash with the wide panel in place, the entire display on the LCD panel will blink as a warning. Since the subject will be illuminated by both the bounce flash and direct flash, it will look unnatural. a Pull out the wide panel gently. Using excessive force may detach the wide panel. 18
![](/manual_guide/products/canon-speedlite-430ex-ii-instruction-manual-afb8b82/20.png)