Canon 430EXII Instruction manual - Page 33
Setting Manual Flash with the Slave Unit - flash units
![]() |
View all Canon 430EXII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
About Slave Group Control -- - 1 Slave group A For example, ~fyou have the slave ID set /---- to < A >for three slave un~tsa, ll three I slave un~tswill be controlled as ~fthey were one Speedl~teIn slave group A - Setting Manual Flash with the Slave Unit Manual flash can be set manually with the slave unit. Do this in the following cases: Y (1) When you want to set the flash output with the slave units individually for wireless or manual flash, as with studio flash units. (2) When you use Speedlite Transmitter ST-E2 for wireless or manual flash. Ps Hold down the button for2 sec. or more. b will bl~nk. CO+. Set the manual flash output. (p.19)
![](/manual_guide/products/canon-speedlite-430ex-ii-instruction-manual-afb8b82/33.png)
About
Slave
Group Control
--
-
1
Slave
group
A
For example, ~
you have the slave ID set
/----
to
<A>
for three slave un~ts
all three
slave un~t
will
be controlled as ~
they
were one Speedl~t
In
slave group
A
Setting Manual Flash with the Slave Unit
-
Manual flash can be set manually with the slave unit. Do this in the
following cases:
(1) When you want to set the flash output with the slave units
individually for wireless or manual flash, as with studio flash units.
(2) When you use Speedlite Transmitter
ST-E2
for wireless or manual
flash.
s
Hold down the
<MODE>
button for2
sec.
or more.
b
<M>
will bl~nk
+.
Set the manual flash output. (p.19)
COPY