Canon 730i User Guide - Page 165

Sending a Document to a Relay Unit with Speed Dialing You can register a telephone number for relay sending under a one-touch speed dialing key or a coded speed dialing code. Check these points before you send a document to another party for relay broadcasting: • Contact the other party and ask for the ITU-T subaddress and password they are using for receiving documents they are to relay. • The other party's fax machine does not have to be a Canon fax machine, but make sure the other party's fax machine supports the use of ITU-T subaddresses and passwords. • Perform the procedure to register a telephone number for one-touch or coded speed dialing. (See "Setting Up One-Touch Speed Dialing," on p. 2-6, or "Setting Up Coded Speed Dialing," on p. 2-15.) • If the speed dialing keys are already set up, perform the procedure to change the one-touch or coded speed dialing settings. (See "Setting Up One-Touch Speed Dialing," on p. 2-6, or "Setting Up Coded Speed Dialing," on p. 2-15.) 6 • When you setup the speed dialing settings, turn 'ON' the OPTIONAL SETTING feature, and select 'TX TYPE'. Select 'ORIG RELAY TX', and set the ITU-T subaddress and password. (See "Setting Up One-Touch Speed Dialing," on p. 2-6, or "Setting Up Coded Speed Dialing," on p. 2-15.) • Confirm that the other party is set up properly to relay documents received from your machine. Your machine cannot automatically confirm whether the other party's machine has been set up properly for relaying a document sent from your machine. Using a Relay Network Sending with the Advanced Communication Key Follow the procedure below to send a document for a relay broadcast with the Advanced Communication key. NOTE You can set only specify one destination for the relay unit. 1 Place your documents on the machine. For instructions explaining how to place your documents, See "Setting the Document on the Machine," on p. 3-3. 6-12 Sending a Document to a Relay Unit for Relay Broadcasting CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0