Canon 730i User Guide - Page 281
Of Rx Copies
View all Canon 730i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 281 highlights
Setting Item 2. RELAY TX GROUP Description Sets up a relay box so your machine can relay document transmissions to other fax machines in your area. (See "Setting Up and Using a Standard Relay Unit," on p. 6-3.) 1. SETUP FILE Sets up a relay box. SET RLY TX GROUP# 00-99 Sets a two digit relay group number. 1.GROUP DIAL NAME Give the relay group a name (up to 24 characters). 2.PASSWORD 0-9999999 Assign a password to protect the relay box settings. 3.TRIGGER Set the trigger to initiate Relay Broadcasting. 1.SUBADDRESS Enter an ITU-T subaddress (up to 20 digits). 2.SENDER'S FAX NO. Enter the telephone number of your machine. 3.MAIL ADDRESS (To) See the Sending Guide . For the LASER CLASS 710, the installation of the optional Network Kit III is necessary to access these items. Summary of Important Settings 4.RX PASSWORD Enter an ITU-T password (up to 20 digits). 5.SELECT ORIG UNIT Sets your machine to check the incoming relay command to make sure the originator is registered. ON TEL= Receives and obeys incoming relay commands for registered originators only. Register originator machines under one-touch speed dialing keys, or coded speed dialing codes. OFF* Receives and obeys all incoming relay commands. 6.PRINT RX DOC. Turns printing ON/OFF for documents received for relay to other machines. 11 ON Prints a copy of every document relayed. # OF RX COPIES From 01 to 99 COPIES; 01 COPIES* Set the number of document copies to print. OFF* No copies are printed. 7.SELECT LOCATIONS TEL= Use one-touch or coded speed dialing to select the fax numbers that will receive the documents relayed from your machine. 11-24 File Settings CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0