Canon 730i User Guide - Page 288

Setting Item 3.TIME SETUP OFF* ON 1.START TIME EVERYDAY* SELECT DAYS 2.END TIME EVERYDAY* SELECT DAYS 2. RX PASSWORD 3. PHONE NO. CHECK OFF* ON Description Sets a time for the machine to start the memory receiving operation. The timer for starting and ending the memory receiving operation is turned 'OFF'. The timer for starting and ending the memory receiving operation is turned 'ON'. Set a specified time to start the memory receiving operation. Set up to five times everyday to start the memory receiving operation. Select one or several days to start memory receiving. You can set up to five times for any of the selected days. Set a specified time to end the memory receiving operation. Set up to five times everyday to end the memory receiving operation. Select one or several days to end memory receiving. You can set up to five times for any of the selected days. Set an RX password to match the ITU-T password of all incoming documents. Enter an ITU-T password (up to 20 digits). To receive a document, this RX password must match the ITU-T password of the incoming document. After the RX password has been set, all incoming documents must have a matching ITU-T password. Enables you to prevent sending a document to an unintended destination. The number you dial is checked with the registered number. If the numbers match, the document is sent. The number is not checked. The machine uses the last six digits of the number you dial, and matches it with the last six digits of the other party's number registered on the remote machine. If the numbers match, the document is sent. Otherwise, the document is not sent. Summary of Important Settings 11 System Settings 11-31 CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0