Canon 730i User Guide - Page 313

Remedy Wait a few minutes and try sending again. If you still cannot send the document, contact the other party and confirm that the other fax machine has been turned ON. If the other fax machine is busy, try sending your document at a later time. When you send documents long distance, press [Redial/Pause] after dialing. (See "Dialing Long Distance with Regular Dialing," on p. 3-14.) #0021 Cause You cannot perform polling receiving. Remedy Make sure the subaddress/password matches the settings on the other party's fax machine. If the other party's fax machine is a Canon fax machine and can set a polling ID, request that the other party set their polling ID to '255' decimal or '1111 1111' binary. #0022 Cause The settings for the one-touch speed dialing keys or coded speed dialing codes you are using to dial the other party have been deleted. Remedy Reset the one-touch or coded speed dialing settings. (See "Setting Up One-Touch Speed Dialing," on p. 2-6, or "Setting Up Coded Speed Dialing," on p. 2-15.) #0025 Cause 1 While registering the number for one-touch or coded speed dialing, you registered the number for confidential or relay sending, but omitted the subaddress. Remedy Open the OPTIONAL SETTING menu for one-touch or coded speed dialing, and make sure that you have entered a subaddress and password (if required) for the telephone number. (See "Setting Up One-Touch Speed Dialing," on p. 2-6, or "Setting Up Coded Speed Dialing," on p. 2-15.) Troubleshooting Cause 2 After setting up relay broadcasting or confidential sending, the subaddress/ password settings for one-touch or coded speed dialing may have been changed. Remedy Confirm the settings for one-touch or coded speed dialing, and make sure the 13 subaddress/password settings have not been changed. (See "Setting Up One-Touch Speed Dialing," on p. 2-6, or "Setting Up Coded Speed Dialing," on p. 2-15.) 13-4 Error Code Table (Listed by Number) CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0