Canon 8120A001 PowerShot G3 Camera User Guide - Page 179

The following messages may appear when the camera is connected to the Direct Print compatible Bubble Jet Printer. Check the error number displayed on the control panel of Bubble Jet Printer and refer to the Bubble Jet Printer Quick Start Guide. Printer in use: Printer warming up: No printhead: Printer cover open: Media type error: Paper lever error: Low ink level: Waste tank full: Printer error: The printer is printing the data from the memory card inserted in the computer or printer. The printer automatically starts printing the images from the camera after completing the current printing. Printer is warming up. When it is ready, the printer starts printing automatically. No print head is installed in the printer. Close the printer´s front cover securely. You selected a paper type incompatible with the printer. Select a compatible paper type in the Print Style menu. Adjust the paper thickness lever to the proper position. The ink tank needs to be replaced soon. Prepare a new ink tank. If you select [Continue] in the error screen, you can restart printing. You can restart printing by pressing the RESUME/ CANCEL button on Bubble Jet Printer. Please request replacement of the waste tank to the shop where you purchased the printer or your nearest Canon customer support center listed in the Contact List provided with the Bubble Jet Printer or in the Bubble Jet Quick Start Guide. Turn off the printer, then turn it on again. If the error persists, please consult your nearest Canon customer support center listed in the Contact List provided with the Bubble Jet Printer or in the Bubble Jet Quick Start Guide. Appendix 173