Canon Canon CX-G6400 4 Inkjet Card Printer CX-G6400 Getting Started Guide - Page 23
turn the printer on and connect, When the next window is displayed
![]() |
View all Canon Canon CX-G6400 4 Inkjet Card Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
13 Check [Always trust software from "CANON FINETECH NISCA INC."] checkbox and then click [Install]. 14 When the next window is displayed, turn the printer on and connect computer and printer with USB cable. When the printer is recognized, installation will begin. Note • If the computer, connected to the printer by USB cable, is linked to a network, it may take some time to recognize the printer. • If you would like to select the connection destination by yourself, click [Select manually...] and select the connection port. Installing Software Important • The USB cable is hot-swappable. However, it should be noted that the USB cable should not be connected or disconnected in the following cases: - When the computer is being booted (before the desktop appears) - When the printer is printing - When the printer driver is being installed • When disconnecting the USB cable with the computer or printer powered, be sure to remove the USB plug on the computer side (USB hub side) in advance. When reconnecting the USB cable, wait for at least 5 seconds after disconnecting it. If you connect the USB cable too early, the printer may malfunction. 20
![](/manual_guide/products/canon-canon-cxg6400-4-inkjet-card-printer-cxg6400-getting-started-guide-f19a6c1/23.png)