Canon Canon CX-G6400 4 Inkjet Card Printer CX-G6400 Getting Started Guide - Page 37
Printing surface, Capacity of Feeder Lift, Tray P. 39
View all Canon Canon CX-G6400 4 Inkjet Card Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Loading Paper 5 Check for curl. If the paper is curled, bend in the direction opposite the curl to flatten it. Important • Paper that is curled upward can cause paper jams or print surface rubbing. ˔ For card CR80 paper/business card/ 4 x 6 inch card/envelopes As shown in the figure, if the paper is placed with the printing surface facing up and the paper is curled upward (Fig.1), decurl it so that the paper is flat. (Fig.1) Printing surface 6 Load the paper in the feeder lift tray according to the paper type. For details, see "Capacity of Feeder Lift Tray" (P. 39). Important • Align the edges before loading. Otherwise, printing may be slanted, or a paper jam may occur. ˔ When using business card/CR80 (paper/plastic card) Load the paper in the feeder lift tray as shown in the figure. If the paper is curled downward (Fig.2), flatten the paper so that the curl does not exceed 2 mm. (Fig.2) Printing surface 0 - 2 mm ˔ For plastic card If the card is curled, decurl it so that the card is flat. Direction of paper feed 34