Canon Color imageCLASS LBP622Cdw Color imageCLASS LBP623Cdw / LBP622Cdw Gettin - Page 26

Appendix En 26 Important Safety Instructions This manual describes only warnings and cautions for the installation and the power supply. Be sure to read "Important Safety Instructions" described in the User's Guide also. WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings. CAUTION Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the machine safely, always pay attention to these cautions. IMPORTANT Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine correctly, and avoid damage to the machine or property. Installation To use this machine safely and comfortably, carefully read the following precautions and install the machine in an appropriate location. WARNING Do not install in a location that may result in a fire or electrical shock • A location where the ventilation slots are blocked (too close to walls, beds, sofas, rugs, or similar objects) • A damp or dusty location • A location exposed to direct sunlight or outdoors • A location subject to high temperatures • A location exposed to open flames • Near alcohol, paint thinners or other flammable substances Other warnings • Do not connect unapproved cables to this machine. Doing so may result in a fire or electrical shock. • Do not place necklaces and other metal objects or containers filled with liquid on the machine. If foreign substances come in contact with electrical parts inside the machine, it may result in a fire or electrical shock. • If any foreign substance falls into this machine, unplug the power plug from the AC power outlet and contact your local authorized Canon dealer. CAUTION Do not install in the following locations The machine may drop or fall, resulting in injury. • An unstable location • A location exposed to vibrations Other cautions • When carrying this machine, follow the instructions in this manual. If carried improperly, it may fall, resulting in injury. • When installing this machine, be careful not to get your hands caught between the machine and the floor or walls. Doing so may result in injury. Avoid poorly ventilated locations This machine generates a slight amount of ozone and other emissions during normal use. These emissions are not harmful to health. However, they may be noticeable during extended use or long production runs in poorly ventilated rooms. To maintain a comfortable working environment, it is recommended that the room where the machine operates be appropriately ventilated. Also avoid locations where people would be exposed to emissions from the machine. Power Supply WARNING • Use only a power supply that meets the specified voltage requirements. Failure to do so may result in a fire or electrical shock. • The machine must be connected to a socket-outlet with grounding connection by the provided power cord. • Do not use power cords other than the one provided, as this may result in a fire or electrical shock. • The provided power cord is intended for use with this machine. Do not connect the power cord to other devices. • Do not modify, pull, forcibly bend, or perform any other act that may damage the power cord. Do not place heavy objects on the power cord. Damaging the power cord may result in a fire or electrical shock. • Do not plug in or unplug the power plug with wet hands, as this may result in an electrical shock. • Do not use extension cords or multi-plug power strips with the machine. Doing so may result in a fire or electrical shock. • Do not wrap the power cord or tie it in a knot, as this may result in a fire or electrical shock. • Insert the power plug completely into the AC power outlet. Failure to do so may result in a fire or electrical shock. • Remove the power plug completely from the AC power outlet during a thunder storm. Failure to do so may result in a fire, electrical shock, or damage to the machine. • Make sure that the power supply for the machine is safe, and has a steady voltage. • Keep the power cord away from a heat source; failure to do this may cause the power cord coating to melt, resulting in a fire or electrical shock. Avoid the following situations: If excessive stress is applied to the connection part of the power cord, it may damage the power cord or the wires inside the machine may disconnect. This could result in a fire. • Connecting and disconnecting the power cord frequently. • Tripping over the power cord. • The power cord is bent near the connection part, and continuous stress is being applied to the power outlet or the connection part. • Applying excessive force on the power plug. CAUTION Install this machine near the power outlet and leave sufficient space around the power plug so that it can be unplugged easily in an emergency. Handling CAUTION Laser Safety This product is confirmed as a Class 1 laser product in IEC60825-1:2014 and EN60825-1:2014. CLASS 1 LASER PRODUCT LASER KLASSE 1 APPAREIL À LASER DE CLASSE 1 APPARECCHIO LASER DI CLASSE 1 PRODUCTO LÁSER DE CLASE 1 APARELHO A LASER DE CLASSE 1 LUOKAN 1 LASER-TUOTE LASERPRODUKT KLASS 1 The laser beam can be harmful to human bodies. Since radiation emitted inside the product is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation. Read the following remarks and instructions for safety. • Never open covers other than those instructed in the manuals for this machine. • If the laser beam should escape and enter your eyes, exposure may cause damage to your eyes. • Use of controls, adjustments, or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. Laser Safety Caution Safety-Related Symbols Power switch: "ON" position Power switch: "OFF" position Power switch: "STAND‐BY" position Push‐push switch "ON" "OFF" Protective earthing terminal Dangerous voltage inside. Do not open covers other than instructed. CAUTION: Hot surface. Do not touch. Class II equipment Moving parts: Keep body parts away from moving parts CAUTION: An electrical shock may occur. Remove all the power plugs from the power outlet. There are sharp edges. Keep body parts away from sharp edges. [NOTE] Some of symbols shown above may not be affixed depending on the product. Consumables WARNING Do not dispose of used toner cartridges in open flames. Also, do not store toner cartridges or paper in a location exposed to open flames. This may cause the toner or paper to ignite, and result in burns or fire. Notice Product Name Safety regulations require the product's name to be registered. In some regions where this product is sold, the following name(s) in parentheses ( ) may be registered instead. Color imageCLASS LBP623Cdw / LBP622Cdw (F174900) FCC (Federal Communications Commission) Users in the U.S.A. Laser Beam Printer, Model F174900 Contains Transmitter Module FCC ID: VPYLB1KA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. [NOTE] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.