Canon DC330 DC330 Instruction Manual - Page 79
Trouble?, Troubleshooting, Power Source, Recording/Playback
UPC - 013803091687
View all Canon DC330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Trouble? Troubleshooting If you have a problem with your camcorder, refer to this section. Consult your dealer or a Canon Service Center if the problem persists. Power Source • The camcorder will not turn on or it turns off by itself. • The disc compartment cover will not open. • The LCD/viewfinder switches on and off. - Battery pack is exhausted. Replace or charge the battery pack ( 19). - Attach the battery pack correctly. - Use the compact power adapter. The charge indicator flashes rapidly. - (one flash at 0.5-second intervals) Charging has stopped because the compact power adapter or the battery pack is faulty. Consult a Canon Service Center. - (two quick flashes at 1-second intervals) Battery pack at least 50% charged ( 20). This is not a malfunction. • Battery pack will not charge. • The charge indicator flashes very slowly (one flash at 2-second intervals). - Charge the battery pack in temperatures between 0 °C and 40 °C (32 °F and 104 °F). - Battery packs become hot with use and may not charge. When the battery pack is outside the charging temperature range, the CHARGE indicator will flash irregularly. The charging will start once the battery pack temperature is below 40 °C (104 °F). - The battery pack is damaged. Use a different battery pack. - If you connect a faulty power adapter or battery pack, the CHARGE indicator flashes approx. twice per second and the charging stops. - Check that the compact power adapter is correctly connected to the camcorder. Camcorder is on but is unresponsive. - The camcorder has exceeded its operational temperature ( appears). Turn off the camcorder and let it cool down before resuming use. Recording/Playback Buttons will not work. - Turn on the camcorder. - Load a disc ( 27). Abnormal characters appear on the screen. The camcorder does not operate properly. - Disconnect the power source and reconnect it after a short time. If the problem still persists, disconnect the power source and press the RESET button with a pointed item. Pressing the RESET button resets all settings. appears on the screen. - Load a disc ( 27). appears on the screen. - Battery pack is exhausted. Replace or charge the battery pack ( 20). The wireless controller will not work. - Set [WL.REMOTE] to [ON] ( 77). - The battery of the wireless controller is exhausted. Replace the battery ( 20). Video noise appears on screen. - When using the camcorder close to devices that emit strong electromagnetic fields (plasma TVs, cellular phones, etc.), keep a distance between the camcorder and these devices. Additional Information • 79