Canon DR-4010C Reference Guide - Page 41
See Cleaning the Roller Unit, on p. 38 and Cleaning the Retard, not use excessive force - parts
UPC - 013803065664
View all Canon DR-4010C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 3 4 Dampen a cloth with water, wring it out thoroughly, and then wipe the rollers of the upper unit while turning them. Do not try to turn the rollers in the lower part of the scanner. Clean these rollers simply by wiping the exposed part. Clean while turning Clean only exposed part IMPORTANT • Do not use detergent to clean the rollers, since any detergent remaining on the rollers could cause a feeding error. • Do not try to turn the rollers in the lower part of the scanner. Turning these rollers by force may damage them and lead to feeding errors. 5 Remove the roller unit and the retard roller for cleaning. (See "Cleaning the Roller Unit," on p. 38 and "Cleaning the Retard Roller," on p. 40.) CAUTION When removing or installing the roller unit or retard roller, do not use excessive force, as this may damage the scanner. 6 Make sure that the upper unit is completely closed by pushing on both edges with both hands until you hear a click. CAUTION When closing the upper unit, be careful not to get your fingers caught, as this may result in personal injury. Maintenance 37