Canon EOS Digital Rebel EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 18
Recharging the Battery
View all Canon EOS Digital Rebel manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Recharging the Battery Connect the power cord. 1 Connect the power cord to the charger. •• Connect the power plug to an AC outlet. mark 18 Remove the cover. 2 • If you remove the battery from the camera, be sure to reattach the cover to protect against short circuit. Attach the battery. 3 • Align the battery's top edge with the mark on the charger. While pressing down the battery, slide it in the direction of the arrow. • To detach the battery, follow the above procedure in reverse. 4 Recharge the battery. s When the battery is attached to the charger, recharging starts automatically and the red lamp starts blinking. s A completely exhausted battery takes about 90 minutes to almost fully recharge. Recharge Level Red lamp 0-50% Blinks once per second 50-75% Blinks twice per second 75-90% Blinks three times per second 90% or higher Stays on * The numbers around red lamp and the blinking frequency correspond to the table above.