Canon EOS Digital Rebel EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 65
Drive Mode Selection
View all Canon EOS Digital Rebel manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Drive Mode Selection The drive mode can be set to single or continuous (2.5 frames per sec.). Press the < H •´ > button. (∫) s The button toggles between the two drive modes. • The continuous drive mode can be selected in the Creative Zone modes. J : Single H: Continuous ´ : Self-timer / Remote control • During continuous shooting, the captured images are first stored in the camera's internal memory and then successively transferred to the CF card. When the internal memory becomes full during continuous shooting, " " will be displayed on the LCD panel and in the viewfinder and the camera cannot take any more shots. As the captured images are transferred to the CF card, you will be able to capture more images. Press the shutter button halfway to check in the viewfinder the current remaining number of maximum burst ( to ) for continuous shooting. The maximum burst number will not be displayed when there is no CF card in the camera. • If you press the shutter button halfway before all the images in the internal memory are transferred to the CF card (while the access lamp blinks), the image transfer to the CF card will stop temporarily. • If " " is displayed in the viewfinder and on the LCD panel, wait until the access lamp turns off, then replace the CF card. • The number display " " - " " to the left of the focus confirmation light indicates the maximum number of continuous shots (maximum burst) that can be taken. • With white balance bracketing (p.53), the four shots can be taken continuously. 65