Canon EOS Digital Rebel EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 39
Shoot.
View all Canon EOS Digital Rebel manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Y Fully Automatic Shooting Shoot. 5 • Compose the shot and press the shutter button fully. s The captured image will be displayed for about 2 sec. on the LCD monitor ( MENU ). • While focusing with , do not touch the focusing ring at the front of the lens. • If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus. • When the CF card becomes full, the CF Full warning " " will appear on the LCD panel and shooting will be disabled. Replace the CF card with one that is not full. • If something obstructed the built-in flash from popping up, < > will blink on the LCD panel. Fix this by setting the power switch to off and on. • Using a non-Canon EF lens with an EOS camera may not result in proper camera or lens operation. • When focus is achieved, the autofocus and auto exposure setting will also be locked. • If the focus confirmation light blinks, the picture cannot be taken. (p.64) • Out of the seven AF points, the one covering the closest subject is selected automatically to achieve focus. • The dot in multiple AF points may flash in red. This indicates that focus has been achieved by all those AF points. • In the Basic Zone modes (except , and ), the built-in flash will pop up and fire automatically in low-light or backlit conditions. To retract the flash, push it back down. • The focus-confirmation beeper can be silenced with the menu's [Beep] setting (˙). 39