Canon EOS Digital Rebel EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 20
Installing and Removing the Battery
View all Canon EOS Digital Rebel manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installing and Removing the Battery Installing the Battery Load a fully charged BP-511 battery pack into the camera. 1 Open the battery compartment cover. • Slide the lever in the direction shown by the arrow in the diagram, and open the cover. Insert the battery into the camera. 2 Point the battery contacts downward. •• Insert the battery pack until it locks into place. Close the cover. 3 • Press the cover closed until it clicks shut. Battery Pack BP-512 can also be used. Battery Level Icons The level of charge remaining is shown in three stages when the Power switch is set to . (p.26) w : Charge is sufficient. e : Charge is low. r: Battery pack must be recharged. 20
20
Load a fully charged BP-511 battery pack into the camera.
Battery Pack BP-512 can also be used.
The level of charge remaining is shown in three stages when the Power
switch is set to <
1
>. (p.26)
w
: Charge is sufficient.
e
: Charge is low.
r
: Battery pack must be recharged.
Installing the Battery
Battery Level Icons
Open the battery compartment
cover.
•
Slide the lever in the direction shown
by the arrow in the diagram, and open
the cover.
1
Insert the battery into the camera.
•
Point the battery contacts downward.
•
Insert the battery pack until it locks into
place.
2
Close the cover.
•
Press the cover closed until it clicks
shut.
3
Installing and Removing the Battery