Canon EOS Elan II EOS ELAN II Instruction Manual - Page 18
Programmed
UPC - 082966123436
View all Canon EOS Elan II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
I Before You Start Do 2 A SO 7,4 -.110 1; O Checking the Battery Level 1 While pressing the lock release button, turn the Command Dial to a Programmed Image Control mode or Creative Zone mode. 2 The battery level will be displayed on the LCD panel by one of the following symbols: : Battery level OK. ca : Keep spare battery handy. Battery is almost exhausted. =2-, fi See page 7. • The battery level can be checked when the Command Dial is unlocked and when the shutter is released. 2CR5 Lithium Battery Service Life Ambient Temperature At 20°C At -20°C -dt.F. 0% Flash Use 90 (110) rolls 45 (50) rolls 50% Flash Use 35 (40) rolls 14 (15) rolls 100% Flash Use 18 (20) rolls 6 (7) rolls No. of 24-exposure rolls based on Canon's Standard Test Method with a new battery and EF 50mm f/1.4 USM lens. • Operating the camera without film will still consume battery power and reduce the number of rolls that can be taken with the battery. • In parentheses, No. of rolls without the use of Eye-Controlled Autofocus. • If nothing is displayed on the LCD panel, the battery may have been installed incorrectly. Take out the battery and install it correctly. • Before using the camera, check the battery level. • In areas where 2CR5 batteries may not be easily available, take spare batteries with you. 18