Canon EOS Elan II EOS ELAN II Instruction Manual - Page 7
fingerprints
UPC - 082966123436
View all Canon EOS Elan II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Handling Precautions Lithium Battery The camera operates on one 2CR5 lithium battery. Check the battery level in the following cases: 1. After replacing the battery. 2. After the camera has not been used for an extended period. 3. The shutter does not release. 4. The camera is being used in a low-temperature environment. 5. Also note the following: • Before installing the battery, wipe the battery contacts to remove fingerprints and dirt. This is to prevent faulty connections and corrosion. • Never disassemble or recharge the battery. Also, never store the battery in high-temperature places or short circuit the battery contacts or toss the battery into a fire. • Although the battery works well under low temperatures, battery performance may suffer slightly at freezing temperatures. In such a case, keep a spare battery warm in a pocket, etc., and use and warm the batteries alternately. Low Battery Power When only the ,C3 symbol blinks on the LCD panel, a picture can still be taken at the proper exposure. However, there may not be enough battery power to advance and rewind the film automatically. Replace with a new battery. Lens To avoid getting the lens surface and electronic contacts scratched, attach the rear lens cap to the detached lens or always put down the lens with the rear end up. 07. 7