Canon EOS Elan II EOS ELAN II Instruction Manual - Page 20
Shutter, Button, Operation
UPC - 082966123436
View all Canon EOS Elan II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3. Shutter Button Operation The EOS camera's shutter button operates in two steps: Press it halfway or all the way. Shutter Button When it is pressed halfway When it is pressed halfway: 1) The selected focusing point is activated to focus the subject. When focus is achieved, the focusing point flashes in red. the beeper sounds, and the green in-focus indicator lights. • There are three focusing points. • If the AF mode dial is set to Al Servo AF for automatic focusing point selection, the focusing point does not flash in red and the in-focus indicator does not light when focus is achieved. 2) The shutter speed and aperture setting are displayed on the LCD panel and in the viewfinder. • The exposure information will continue to be displayed for four seconds after the shutter button is released. When it is pressed completely ■ • When it is pressed completely: The shutter is released to take the picture and then the film advances. Camera movement during the moment of exposure is called camera shake. Camera shake can cause blurred pictures. To prevent blurred pictures due to camera shake: • Hold the camera firmly. • Use the pad of your fingertip to first press the shutter button halfway, then press all the way. 20