Canon EOS Elan II EOS ELAN II Instruction Manual - Page 94
Predictive
UPC - 082966123436
View all Canon EOS Elan II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Major Specifications AF working range: Focusing point selection* AF-assist beam: Shutter Shutter speeds: Self-timer Film loading: Film advance* Film rewind* Built-in flash: Flash exposure aperture* Flash sync speed: 94 Al Servo AF: Tracks subject movement and allows shutter release at anytime. Predictive AF provided. C). Al Focus AF: If the subject focused in the One-Shot AF mode starts moving, the mode switches to Al Servo AF automatically. ®. Manual focusing: Enabled by setting the focus mode switch to -M" and turning the focusing ring. EV 0-18 (at ISO 100) ®. Automatic: Camera-selected. 2. Manual: User-selected with button and dial. C). Eye-controlled: User-selected by eye. Built-in AF-assist beam emits automatically for any one of the three focusing points. (Range: 6.5 m for the center focusing point and 4 m for the left and right focusing points.) Compatible with focal lengths from 28mm to 135mm. Vertical-travel, focal-plane shutter with all speeds electronically-controlled. 30 to 1/4000 sec. (in half steps) and bulb. Electronically-controlled for 10-sec. delay. Automatic. After film is loaded and the back is closed, the film advances to frame 1 automatically. Automatic. C). Single-frame 2. Continuous (Approx. PP frames per sec. max.) Automatic at the end of the roll. Built-in flash head in the pentaprism with 3-zone TTL auto flash system, serially controlled. ®. Guide No. 13 (in meters at ISO 100) 0. Recycling time: Approx. 2 sec. C). Flash coverage: 28mm lens covered. ®. Firing conditions: Fires automatically in backlit or low- light conditions in the Full Auto, Portrait, and Close-up modes. Fires with the flash button in Creative Zone modes. C). In Programmed Image Control modes: Automatically set by the TTL program. 2. In Av and manual modes: Manually set. C). In Tv mode: Automatically set to match set shutter speed. T. 1. In Programmed Image Control modes: Automatically set to 1/60 to 1/25 sec. q. In Av mode: Automatically set to 30" to 1/125 sec. to match the set aperture. In Tv and manual modes: Manually set to 1/125 sec. or slower.