Canon FAXPHONE B45 FAXPHONE B45 User's Guide - Page 107
LCD messages
View all Canon FAXPHONE B45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
LCD messages The following messages are displayed on the LCD when the fax is performing a function or encounters an error. The error code appears in the activity report (see p. 7-7). Message Cause Action AUTO REDIAL The fax is waiting to redial the receiving number because the line was busy or the receiving party did not answer when you tried to send the document. Wait for the fax to automatically redial the number. If you want to cancel automatic redialing, press [Stop] (see p. 4-9). BUSY/NO SIGNAL The telephone number you dialed is busy. Try sending the document at a later time. The fax number dialed was incorrect. Check the fax number and dial again. The other party's fax machine Contact the other party and is not working. have them check their fax machine. The other party is not using a G3 machine. Contact the other party and ask them to send or receive the document using a G3 machine. The touch tone/rotary pulse setting on your fax is Set your fax to the setting that matches your telephone line 9 incorrect. (see p. 2-6). The receiving fax machine did not answer within 55 seconds (after all automatic redialing attempts). Contact the receiving party and have them check their fax machine. You can try to send the document using manual sending (see p. 4-4). For longdistance call, add pauses to the registered number (see p. 4-8). CARTRIDGE JAMMED The cartridge holder cannot move. This is normally due to a paper jam. Clear the paper jam or whatever is obstructing the cartridge holder and then press [Stop] and start again. Do not attempt to move the cartridge holder manually. The scanner unit may not be in the fully upright position. Press the document release button, then gently move the scanner unit to the fully upright position. SOLUTIONS TO COMMON PROBLEMS 9-15