Canon LV-7215 lv7215_7210_5210_manual.pdf - Page 32

Video Input Input Source Selection (Video, S-Video) Direct Operation Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control unit. Before using these buttons, correct input source should be selected through menu operation as described below. INPUT button Video Computer 1 Computer 2 ✽ VIDEO button Video ✽ When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is not displayed. Menu Operation 1 Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right button to move the red frame pointer to the Input Menu icon. 2 Press the Point Down button to move the red arrow pointer to Video and then press the SET button. The Source Select Menu will appear. 3 Move the pointer to the source that you want to select and then press the SET button. Auto When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1st S-Video 2nd Video The S-VIDEO IN jack has priority over the VIDEO IN jack under the condition of connecting both the S-VIDEO IN jack and the VIDEO IN jack. Video When video input signal is connected to the VIDEO IN jack, select Video. S-Video When video input signal is connected to the S-VIDEO IN jack, select S-Video. Input Menu VIDEO Move the pointer to Video and press the SET button. Source Select Menu (VIDEO) Move the pointer to the source that you want to select and press the SET button. ✽ When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is not displayed. NOTE G See "Computer Input" on page 24 for a signal compatible with HDCP. 32