Canon LV-7215 lv7215_7210_5210_manual.pdf - Page 41

Maintenance and Cleaning - repair

Page 41 highlights

Maintenance and Cleaning Warning Indicator The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. The projector is shut down and the WARNING indicator is flashing red When the temperature inside the projector exceeds the normal temperature, the projector is automatically shut down to protect the inside of the projector. The POWER indicator is flashing and the projector is being cooled down. When the temperature inside the projector returns to normal, the POWER indicator lights red and the projector can be turned on. NOTE G After the temperature inside the projector returns to normal, the WARNING indicator still continues to flash. When the projector is turned on again, the WARNING indicator stops flashing. TOP CONTROL KEY STONE OL + LAMP REPLACE WARNING POWER Then check the items below.  Did you provide appropriate space for the projector to be ventilated? Check the installing condition to see if ventilation slots are not blocked.  Is the projector not installed near the ventilation duct of airconditioning equipment which may be hot? Install the projector away from the ventilation duct of air-conditioning equipment.  Are the air filters clean? Clean the air filters periodically. WARNING flashing red POWER Indicator The projector is shut down and the WARNING indicator lights red TOP CONTROL When the projector detects an abnormal condition, it is automatically shut down to protect the inside and the WARNING indicator lights red. In this case, disconnect the AC power cord and reconnect it, and then turn the projector on once again for check. If the projector is still turned off and the WARNING indicator lights red, disconnect the AC power cord and contact the service station for check and repair. KEY STONE OL + LAMP REPLACE WARNING POWER CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER THE ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. WARNING lights red POWER Indicator 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

41
Maintenance and Cleaning
The WARNING indicator shows the state of the function which protects the projector.
Check the state of the WARNING
indicator and the POWER indicator to take proper maintenance.
WARNING
LAMP REPLACE
POWER
KEY
STONE
OL
+
TOP CONTROL
Warning Indicator
WARNING
LAMP REPLACE
POWER
KEY
STONE
OL
+
WARNING
lights red
TOP CONTROL
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE AC POWER
CORD
CONNECTED
UNDER
THE
ABNORMAL
CONDITION.
IT MAY RESULT IN FIRE OR ELECTRIC
SHOCK.
When the temperature inside the projector exceeds the normal
temperature, the projector is automatically shut down to protect the
inside of the projector.
The POWER indicator is flashing and the
projector is being cooled down.
When the temperature inside the
projector returns to normal, the POWER indicator lights red and the
projector can be turned on.
NOTE
After the temperature inside the projector returns to normal, the WARNING
indicator still continues to flash.
When the projector is turned on again, the
WARNING indicator stops flashing.
Then check the items below.
Did you provide appropriate space for the projector to be
ventilated?
Check the installing condition to see if ventilation slots
are not blocked.
Is the projector not installed near the ventilation duct of air-
conditioning equipment which may be hot? Install the projector
away from the ventilation duct of air-conditioning equipment.
Are the air filters clean?
Clean the air filters periodically.
The projector is shut down and the WARNING indicator lights red
When the projector detects an abnormal condition, it is automatically
shut down to protect the inside and the WARNING indicator lights
red.
In this case, disconnect the AC power cord and reconnect it, and
then turn the projector on once again for check.
If the projector is still
turned off and the WARNING indicator lights red, disconnect the AC
power cord and contact the service station for check and repair.
The projector is shut down and the WARNING indicator is flashing red
WARNING
flashing red
POWER
Indicator
POWER
Indicator