Canon LV-7215 lv7215_7210_5210_manual.pdf - Page 34

Video Input Video System Selection 1 Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right button to move the red frame pointer to the AV System Menu icon. 2 Press the Point Down button to move the red arrow pointer to the system that you want to select and then press the SET button. Video or S-Video Auto The projector automatically detects incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. AV System Menu (Video or S-Video) AV System Menu icon This box indicates the system being selected. Move the pointer to a system and press the SET button. Component Auto The projector automatically detects incoming video signal, and adjusts itself to optimize its performance. COMPONENT VIDEO SIGNAL FORMAT If the projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i. AV System Menu (Component) AV System Menu icon This box indicates the system being selected. Move the pointer to a system and press the SET button. NOTE G The AV System Menu cannot be selected when selecting RGB(Scart). 34