Canon LV-7215 lv7215_7210_5210_manual.pdf - Page 33
Input Source Selection Component, RGB Scart 21-Pin
View all Canon LV-7215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Video Input Input Source Selection (Component, RGB Scart 21-Pin) Direct Operation Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control unit. Before using these buttons, correct input source should be selected through menu operation as described below. INPUT button Computer 1 Computer 2 ✽ Video COMPUTER button Computer 1 Computer 2 ✽ ✽ Computer 2 is not displayed when the RGB IN-2/ COMPONETN IN/ RGB OUT terminal is used as Monitor out. Menu Operation 1 Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right button to move the red frame pointer to the Input Menu icon. 2 Press the Point Down button to move the red arrow pointer to either Computer 1 or Computer 2 (Only the Computer 1 is displayed when Monitor out is selected in the Setting Menu.), and then press the SET button. The Source Select Menu will appear. 3 Move the pointer to the correct input source and then press the SET button. Component When the input source is coming from video equipment connected to the RGB IN-2/ COMPONENT IN/ RGB OUT terminal with a Component-VGA Cable, select Component. RGB (Scart) When the input source is coming from video equipment connected to the RGB IN-2/ COMPONENT IN/ RGB OUT terminal with a ScartVGA Cable, select RGB (Scart). Input Menu Computer 2 Input Menu icon Move the pointer (red arrow) to Computer 2 and press the SET button. Source Select Menu Move the pointer to Component or RGB (Scart) and press the SET button. NOTE G Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page 53 for order. 33