Canon LV-7215 lv7210_series_exp_cmd.pdf - Page 18
CF_IMAGECOMMAND, 5 PC Control COMMAND, CF_FSYNC COMMAND, Set Fine Sync for PC signal
View all Canon LV-7215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.4.10 CF_IMAGECOMMAND COMMAND "CF_IMAGE_%1" [CR] "STAND" ----- Standard(Image adjustment is set to factory default setting value) "REAL" ------ High contrastl(Fixed value to display a graphic image with %1 natural tone.) "CINEMA" ---- Cinema(Fixed value to focus on the tone reproduction for movie.) "CUSTOM1" -- Custom(the value is set and store by a user) Details Response Select an Image MODE.(When it is in usual Power ON state, this is valid.) Parameter "CUSTOM1" is the same as selecting custom"Custom1" on OSD menu. The value set by this Command is stored in EEEPROM. When ALL OFF the projector the value will return to the original setting. Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.4.11 CF_IMAGE ADJ COMMAND COMMAND "CF_IMAGEADJ_%1" [CR] %1 "RST"------Reset Image adjustment "STR1"----Store current image adjustment to Image 1 Details Reset or Store for image adjustment. (When it is in usual Power ON state, this invalid.) "STR1" is the same as "Custom" when choosing" Store" on OSD menu. The setting value set in "Image1" to "Custom" is stored, so even if the projector is set to ALL OFF and is turned on again, the setting value will be able to be back. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.5 PC Control COMMAND 8.5.1 CF_FSYNC COMMAND COMMAND "CF_FSYNC_%1" [CR] "0000-0031"---- Directly set Fine Sync setting value %1 "UP Fine Sync setting value+1 "DN Fine Sync setting value-1 Details Set Fine Sync for PC signal(Only valid when it is in the usual Power ON status.) The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (STANDBYMODE stays.) Response Acceptable "000" [CR] Unacceptable "101" [CR] ----Input is-VIDEO Page 18