Canon LV-7215 lv7210_series_exp_cmd.pdf - Page 24

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.7.3 CF_INPUT_%1_%2 COMMAND COMMAND "CF_INPUT_%1_%2" [CR] "COMPUTER1".... Select COMPUTER 1 input %1 "COMPUTER2".... Select COMPUTER 2 input "VIDEO Select VIDEO input When %1 is COMPUTER1... "ANALOG Select ANALOG RGB input "DIGITAL Select DIV input "HDCP Select DCHP input When %1 is COMPUTER2 %2 "ANALOG Select ANALOG RGB input "YPBPR Select Component input "SCART Select SCART input When %1 is VIDEO "AUTO Select VIDEO AUTO MODE "VIDEO Select VIDEO "S-VIDEO Select S-VIDEO Details Select Input and also the source that is specified in %2. (Only valid when it is in the usual Power ON status.) Response Acceptable "000" [CR] Unacceptable "%%%" [CR] 8.7.4 CF_SYSTEMCOMMAND COMMAND "CF_SYSTEM_%1" [CR] Input is PC "MODE1"------ Select MODE 1 "MODE2"------ Select MODE 2 "MODE3"------ Select MODE 3 "MODE4"------ Select MODE 4 "MODE5"------ Select MODE 5 "AUTO"-------- Select System" AUTO" "NTSC"-------- Select NTSC "NTSC443"-- Select NTSC4.43 "PAL"---------- Select PAL %1 "SECAM"------ Select SECAM "PAL-Ｍ"------ Select PAL-M "PAL-Ｎ"------ Select PAL-N Input-VIDEO "1080Ｉ"------ Select 1080i "1035Ｉ"------ Select 1035i "720 Select 720p "575 Select 575p "480 Select 480p "575 Select 575i "480 Select 480i Details Select current Input system. （Only valid when it is in the usual Power ON status.) When Input does not meet the requirement for specified %11, the response will be "101" and the Command does not execute. Note 1) "NTSC" / "NTSC4.43" / "PAL" / "SECAM" / "PAL-M" / "PAL-N" is available only when Input-VIDEO or S-VIDEO. Note 2) "1080I" / "1035I" / "720p" / "575P" / "480P" / "575I" / "480I" is available only when Input is Y, Pb/Cb, Pr/Cr. Page 24