Canon LV-7215 lv7210_series_exp_cmd.pdf - Page 32
Cf_fdefaultcommand, 11.17 Cf_logocapturecommand
![]() |
View all Canon LV-7215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.11.16 CF_FDEFAULTCOMMAND COMMAND "CF_FDEFAULT_%1" [CR] %1 "RST" Details Set Factory Default. (Only valid when it is in the usual Power ON status.) Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.11.17 CF_LOGOCAPTURECOMMAND COMMAND "CF_LOGOCAPTURE_%1" [CR] %1 "START Capture ON Details Capture the current image on screen. When beginning to capture the image, any command is not available until the capture has done. When sending the command during the process, the projector returns the error code, "301". Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] Page 32
![](/manual_guide/products/canon-lv7210-lv7210seriesexpcmdpdf-fbc41a2/32.png)
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION
for LV-5210/7215/7210
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]
8.11.16 CF_FDEFAULTCOMMAND
COMMAND
“CF_FDEFAULT_%1” [CR]
%1
“RST”
Details
Set Factory Default. (Only valid when it is in the usual Power ON status.)
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]
8.11.17 CF_LOGOCAPTURECOMMAND
COMMAND
“CF_LOGOCAPTURE_%1” [CR]
%1
“START”
..................
Capture ON
Details
Capture the current image on screen.
When beginning to capture the image, any command is not available until
the capture has done. When sending the command during the process, the
projector returns the error code, “301”.
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]
Page
32