Canon LV-7215 lv7210_series_exp_cmd.pdf - Page 31
Cf_keydiscommand, 11.13 Cf_terminalcommand, 11.14 Cf_standbymodecommand, 11.15
View all Canon LV-7215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Response value will return to the original setting. Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.11.12 CF_KEYDISCOMMAND COMMAND "CF_KEYDIS_%1" [CR] N/A" --- RC and KEY are available %1 "RC" ...Bar the use of RC "KEY" ...Bar the use of KEY Details Set bar the use of RC/KEY. (Only valid when it is in the usual Power ON status.) Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.11.13 CF_TERMINALCOMMAND COMMAND "CF_TERMINAL_%1" [CR] %1 "COMPUTER"...... Set Input mode "MONITOR".......... Set Monitor Out Mode Details Set TERMINAL(Only valid when it is in the usual Power ON status.) In this model, Terminal is COMPTUER2. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.11.14 CF_STANDBYMODECOMMAND COMMAND "CF_STANDBYMODE_%1" [CR] %1 "ECO Standby power requirement is smaller "NORMAL".... Normal Standby power requirement Details Set STANDBYMODE (Only valid when it is in the usual Power ON status.) Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.11.15 CF_POINTERCOMMAND COMMAND "CF_POINTER_%1_%2" [CR] "SPOTLIGHT".......... Select Spotlight %1 "ARROW Select Arrow "FINGER Select Finger "LASER Select Laser mark "MAX Maximum Spotlight %2 "MID Medium Spotlight "MIN Minimum Spotlight Details Select POINTER image (Only valid when it is in the usual Power ON status.) Note1) %2 is available when "SPOTLIGHT" is specified only. When "ARROW"/"FINGER"/"LASER", specify "CF_POINTER_%1" [CR]. Note2) When "SPOTLIGHT", %2 cannot be omitted. Page 31